Operating Instructions
Table Of Contents
- 1) About the SurfTab breeze 10.1 quad
- 2) Safety information
- 3) Technical specifications
- 4) Scope of delivery
- 5) Controls and connections
- 6) Charging the SurfTab
- 7) Switching on the SurfTab
- 8) Elements on the home screen
- 9) Using the touch screen
- 10) Personalising the home screen
- 11) Setting up a screen lock
- 12) Connecting to the Internet
- 13) Using the camera
- 14) Setting up/removing an email account
- 15) Installing/Uninstalling apps
- 16) Connecting other devices
- 17) Activating standby mode
- 18) Reset and recovery mode
- 19) Switching off the SurfTab
- 20) Notes on copyright and trademarks
- 21) Notes on disposal
- 22) Notes on liability and warranty
EN
21
Connecting another device via Bluetooth®
a) Select "settings" + "bluetooth" in the applications menu.
b) Slide the switch from "o" to "i".
c) Activate the Bluetooth function on the device you want to connect and
make the device visible to other Bluetooth devices, if necessary. To do so,
refer to the instructions in the operating manual of the device.
d) Tap "
bluetooth". A list of all available Bluetooth devices in the vicinity
will appear.
e) Now tap the device you want to connect and confirm by tapping "
paiR".
f) You may also have to confirm pairing on the device you want to connect.
Connecting to a TV via HDMI®
a) Select "settings" + "display" + "hdmi settings".
b) Activate the HDMI function by clicking the box on the right side. Upon
successful activation, a check mark appears.
c) Now connect a mini-HDMI cable with one end to the SurfTab and with the
other end to the TV.
d) Now select on your TV remote control the HDMI port that is connected to
the SurfTab.
17) Activating standby mode
If you do not want to use your SurfTab for a while, press the on/off switch briefly
to put the SurfTab into standby mode and save power. To exit standby mode,
briefly press the on/off switch again.
Once you have reactivated the SurfTab, it will initially display the lock screen.
Place your finger on the lock symbol and drag it to the right to the open lock.
Your SurfTab will now display the home screen.
i
If you previously set up a screen lock, you must now identify yourself using the
method that you chose in order to unlock the SurfTab.
i
Standby mode is activated automatically when the SurfTab is not used for
a certain time. You can specify the period of time after which the SurfTab
automatically goes into standby mode under "SettingS" + "diSpLay" + "SLeep".