Operating Instructions

EN
22
Proceed as follows to connect your SurfTab to a Miracast-enabled television:
a) First, take all of the necessary steps to prepare your Miracast-enabled
television for the Miracast transfer (consult your television’s operating
instructions for details).
b) Tap the Windows button to switch to the home screen of your SurfTab.
c) Open the Charm Bar by swiping your finger inwards from the right-hand
edge of the screen.
d) Tap "
DeviCes" in the Charm Bar.
e) Now tap "
projeCt".
f) Tap "
aDD a Wireless Display". The SurfTab now searches for available Miracast
devices nearby. A list of all available Miracast devices then appears.
g) Tap the device that you wish to connect to.
h) A short time later, the selected device will show the display of the SurfTab.
i
If your television device does not support Miracast technology, a "Miracast dongle"
can be used to connect the SurfTab via Miracast. In this case, you must ensure that
the selected dongle is compatible with both the SurfTab and your television.
16) Using the camera
A camera application is already installed on your SurfTab. It is available on the
home screen as a live tile with a camera symbol. Tap the tile to open the camera.
The following screen appears: