Operating Instructions

EN
24
If you wish to subsequently activate or deactivate the automatic update
function, proceed as follows:
a) Tap the Windows button to switch to the home screen.
b) Open the Charm Bar by swiping your finger inwards from the right-hand
edge of the screen.
c) Tap "
settings" in the Charm Bar.
d) Now tap "
Change pC settings" in the bottom-right area.
e) Tap "
upDate amD reCovery" in the bottom-left area and then "Choose hoW upDates
get installeD" (centre of the screen).
f) Under "
imporant upDates", select how the SurfTab should proceed with
updates in future.
i
Further down on the same screen, you can also specify how the SurfTab should
handle other forms of updates ("reCommeNded updates" and "miCrosoft update").
g) Confirm your selection with "
apply".
18) Performing a system backup
To enable a system recovery (including all data) in the event of failure, the SurfTab
allows you to make a "system image" backup. We recommend performing the
backup using an external hard drive. To do so, proceed as follows:
a) Connect an external hard drive to the USB 2.0 port on the SurfTab using a
USB cable.
b) Open the Charm Bar by swiping your finger inwards from the right-hand
edge of the screen.
c) Tap "
settings" in the Charm Bar.
d) Now tap "
Change pC settings" in the bottom-right area.
e) Tap "
Control panel" in the bottom-left area in the device settings.
The Control Panel in the desktop view opens.
f) Tap "
File history" in the Control Panel.
g) Tap "
system image BaCkup" in the bottom-left area of the following window.
The SurfTab asks whether you would like to save the backup.