Operating Instructions

EN
25
h) In this window, select (highlight) "on a harD Disk", and in the drop-down
window directly beneath, select the connected external hard drive as the
target drive for saving the system image.
i) Confirm by tapping "
next" in the bottom-right area of the window.
The SurfTab shows which drives will be backed up. Confirm by tapping
"start BBaCkup".
The system image is created and stored on the hard drive.
19) Reset and recovery
Reset
If your SurfTab "freezes" and no longer responds, you can restart it. Press and
hold down the on/off switch until the device switches off. Wait for about 20
seconds and then turn the device on normally.
Recovery
If you would like to re-set up your SurfTab, proceed as follows:
a) Tap the Windows button to switch to the home screen.
b) Open the Charm Bar by swiping your finger inwards from the right-hand
edge of the screen.
c) Tap "
settings" in the Charm Bar.
d) Now tap "
Change pC settings" in the bottom-right area.
e) Tap "
upDate anD reCovery" in the bottom-left area and then "reCovery" on the left.
f) Three different options for re-setting up the SurfTab now appear in the
middle of the screen. Read the description for each method and select the
most appropriate method in your case.
g) Begin the recovery process by tapping "
get starteD" or "restart noW", and then
follow the instructions on the SurfTab.
20) Switching off the SurfTab
a) Press the on/off switch for approximately five seconds to switch off the SurfTab.
The lock screen appears in the top half of the screen.
b) Drag the lock screen down with your finger to shut down and switch off
the SurfTab.