EN SurfTab® xintron i 10.
Contents 1) About the SurfTab xintron i 10.
Defining settings for 3G mode …………………………………………… 17 Removing the SIM card …………………………………………………… 19 14) Setting up/removing an email account ……………………………… 19 Setting up an email account ……………………………………………… 19 Removing an email account ……………………………………………… 20 15) Installing/uninstalling apps …………………………………………… 20 Downloading and installing apps ………………………………………… 20 Uninstalling apps ………………………………………………………… 21 16) Using navigation ………………………………………………………… 21 Navigating with the SurfTab ……………………………………………… 21 17) Using the
We hope you enjoy your TrekStor SurfTab xintron i 10.1 3G. Please read the following passages carefully to familiarise yourself with the functions of this product and how to operate it. IMPORTANT! Follow the safety information in Section 2. IMPORTANT! Please keep these instructions in a safe place for future reference. Should the device change hands, pass these instructions on to the new owner. Up-to-date product information is available on the TrekStor website: www.trekstor.de Visit www.
2) Safety information These instructions use the following warning symbols and key words: DANGER Indicates possible danger to life and/or danger of severe, irreversible injuries. CAUTION Follow instructions to avoid injuries and material damage. WARNING Follow instructions to avoid material damage. NOTE Further information about the use of the device.
DANGER Do not cover the device or charger during operation or while charging. This may cause the device/charger to overheat and potentially catch fire! CAUTION This device can generate high sound volumes. Never listen at high volumes for long periods. Doing so can result in immediate or gradual hearing damage. Remember: Permanent hearing damage may only emerge later in life. You may become used to listening to high volumes over time, making them appear normal to you.
Intended operating conditions Protect the device from extremely high or low temperatures and fluctuations in temperature. Use it at an ambient temperature between 10º C and 40º C. Do not place the device near a heat source and protect it from direct sunlight. Never expose the device to humidity, condensation or moisture. Ensure you use and store the device in a dust-free environment.
3) Technical specifications Processor (CPU) Quad core Intel® Atom™ x3-C3230RK processor (up to 1,2 GHz) Storage capacity 8 GB RAM 1 GB DDR3 Graphics processing unit (GPU) Mali 450 MP4 Display type 5-point capacitive multi-touch TN display Display size 10.1" (25.7 cm) Aspect ratio 17:10 Screen resolution 1024 x 600 Interfaces Micro-USB 2.0 (with host function), audio out / mic in, microphone, camera, memory card reader, 3G (Micro-SIM), GSM, WiFi, Bluetooth® 4.
A B C D E F G H J I 9 EN
5) Controls and connections A) B) C) D) E) F) G) H) I) J) Front camera Touch screen Rear camera Earpiece Micro-USB socket / Charging socket Audio port On/off switch Volume control Memory card slot SIM card slot Microphone Speaker 6) Charging the SurfTab Please fully charge your SurfTab before you use it for the first time. Connect your SurfTab to a plug socket using the USB cable and power adapter. The SurfTab is fully charged when the two-colour status LED turns yellow.
8) Elements on the home screen A) B) C) D) E) F) G) H) Google™ Search Google™ language search Back to the previous screen Home icon (back to the home screen) View all open elements Applications menu Quick start bar Status display and quick menu (swipe the status display on the right downwards and then tap one of the icons to see the quick menu) 11 EN
9) Using the touch screen Scrolling The home screen of your SurfTab extends 3 pages to the right of the first window. You can set up these pages by placing apps or widgets on the possible further pages (see Section 10). Slide your finger from right to left (or the reverse) across the screen to access these pages. In an open window (for example, in a menu, browser, app or in folders), you "drag" the screen by sliding it in the direction you require with your finger.
Selecting an element To open an element or select an option, briefly touch the icon you require with your finger. If you want to close a recently used element (app, widget, menu), tap the display of all open elements. Place your finger on the element that you want to close and drag the element to the left or right to close it.
Enlarging and reducing the view You can enlarge the display of some views (images, websites etc.). Move two fingers apart on the screen to enlarge the display. In reverse, move two fingers towards each other on the screen to reduce the display again. Using the display keyboard If you tap a text field in order to enter text (for example, a Web address), the display keyboard appears. Enter the text in the usual way via the keyboard. Use the "?123" and "~[<" buttons to enter numbers and special symbols.
Adding apps to the home screen a) Tap the applications menu in the quick start bar on the home screen. A screen opens showing the apps that are currently available. b) Keep pressing the app that you have selected until the home screen appears. c) Now drag the selected icon to an empty position of your choice within the selected window. Drag the icon to the page edge to place it on another page. You can move an icon placed on your home screen at any time.
11) Setting up a screen lock To make the data on your SurfTab more secure, we recommend that you set up a screen lock. Please proceed as follows: a) Select "SETTINGS" in the applications menu. b) Drag the list up until you can see the "SECURITY" menu item. Tap "SECURITY". c) Now tap "SCREEN LOCK". d) Now tap the type of screen lock that you require to then set it up. Whenever you now unlock the screen, you will be prompted for the form of identification that you have set up.
13) Connecting to the Internet via 3G The 3G function on your SurfTab means that you are independent of available WiFi networks. You connect to the network via your mobile communications provider. Inserting the SIM card Only insert the SIM card when the device is completely switched off. The card will not be recognised if the device is in standby mode. It is advisable to use the micro SIM cards intended for the SIM slot rather than using adapters in order to prevent any mechanical faults.
Data usage You can limit your data usage here. To do so, tap on "DATA USAGE". Mobile data Drag the slider beside "MOBILE DATA" to the right in order to activate the data service or to the left to deactivate it. Set mobile data limit If you wish to limit your data usage, drag the slider beside "SET MOBILE DATA LIMIT" to the right. Confirm the "LIMITING DATA USAGE" prompt by tapping "OK". Date Tap the date to set the monthly usage cycle. If you want to make a change, select the "CHANGE CYCLE..." option.
GSM/WCDMA preferred Uses both 2G and 3G for data connection, preference is given to 3G, if available WCDMA only Uses only 3G for data connection GSM only Uses only 2G for data connection Select your desired method of connection by tapping the relevant option. The "GSM/WCDMA PREFERRED" option is the optimum standard setting. Network operators Here you can select the desired mobile communications provider. The "SEARCH NETWORKS" and "CHOOSE AUTOMATICALLY" options are available.
Removing an email account a) Select "SETTINGS" in the applications menu. b) Drag the list up until you can see "ACCOUNTS" and tap the e-mail icon. c) Now tap the account that you wish to remove. d) Tap the three vertically stacked dots on the top right side and then select "REMOVE ACCOUNT". e) Confirm your selection once again via "REMOVE ACCOUNT" and the account will be deleted.
Uninstalling apps To remove apps you have installed on your SurfTab, proceed as follows: a) Tap "SETTINGS" in the applications menu. b) Drag the menu up with your fingertip until you can see "APPS". Tap "APPS". c) Drag the menu to the left with your fingertip until you reach the "DOWNLOADED" or "ALL" category. d) Tap the app that you want to remove with your fingertip and select "UNINSTALL" in the window that appears. Confirm once more with "OK" and the app will be uninstalled.
17) Using the camera Tap the camera icon in the applications menu or in the quick start bar. The following screen appears: Taking a photo Hold the SurfTab with the camera in the required direction and press the shutter button (17 A). The picture is saved and the SurfTab briefly displays a preview of the photo. Accessing additional camera settings a) On the top right of the screen you will find three vertically stacked dots. Tap the dots to adjust to your desired shooting mode.
Editing photos a) Briefly tap the lower edge of the display to show the task bar. Now tap the home icon to exit camera mode. b) Open the gallery by tapping the "PHOTOS" symbol in the applications menu or in the quick start bar. c) Now tap the photo that you would like to edit. The following symbol appears on the bottom left of the screen: d) Tap this symbol. Various editing options (regarding exposure, framing, cropping, colour settings, etc.) are now displayed beneath the photo.
Connecting a USB device External USB devices such as USB-Sticks can be connected directly via the Micro-USB socket of the SurfTab or by using a Micro-USB host adapter cable. To be able to move files between your SurfTab and an external storage device, you need an app that functions as a file browser (such as the "ES FILE EXPLORER" or the "FILEBROWSER"). a) c) Connect the external USB storage device to the SurfTab and wait approximately 20 seconds.
Proceed as follows to connect your SurfTab to a Miracast-enabled television: a) First, take all of the necessary steps to prepare your Miracast-enabled television for the Miracast transfer (consult your television’s operating instructions for details). b) Select "SETTINGS" in the applications menu on the SurfTab. c) Activate the WiFi function on the SurfTab. To do so, select "WI-FI" and drag the on/off switch for WiFi from left to right.
20) Reset and recovery mode Resetting the SurfTab (Reset) If your SurfTab freezes and no longer responds, you can force a shutdown by pressing and holding the on/off switch for approximately 10 seconds. Then you can switch the SurfTab on again as usual. Putting the SurfTab into recovery mode/loading the factory settings The "recovery mode" allows you to reset the device to its factory settings, delete forgotten passwords or delete the memory of the SurfTab, for instance.
22) Notes on copyright and trademarks Copyright law prohibits the copying of the content of these operating instructions (illustrations, reference documents etc.), in whole or in part, without the permission of the copyright holder. Intel, Intel Atom, Intel Inside and the Intel Inside logo are trademarks of Intel Corporation in the U.S. and/or other countries. Android and Google Play are trademarks of Google Inc. Use of these trademarks is subject to Google Permissions.
23) Notes on disposal Disposal This symbol indicates that this product and/or the battery used contain components that are harmful to the environment and/or human health if not disposed of correctly. As the owner of a used electrical or electronic device, you may not dispose of this device together with unsorted domestic waste. Remove the battery from the device before disposing of your old device.
E C D E C L A R AT I O N O F C O N F O R M I T Y As manufacturer and importer respectively: TrekStor GmbH Kastanienallee 8 - 10 D-64653 Lorsch, Germany ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ herewit
Supportinformationen Sollten Sie Fragen zu Ihrem TrekStor Produkt haben, gehen Sie bitte wie folgt vor: • Überprüfen Sie anhand der Produkteigenschaften und der Funktionen Ihres Gerätes (auf der Verpackung ersichtlich), ob Sie die richtigen Einstellungen vorgenommen haben. • Lesen Sie aufmerksam die gesamte Bedienungsanleitung. • Informieren Sie sich auf unserer Website www.trekstor.de über aktuelle Informationen zu Ihrem Produkt (z. B. neu verfügbare Firmware-Updates).
