User manual
Table Of Contents
- 1) About the SurfTab xintron i 10.1 3G
- 2) Safety information
- 3) Technical specifications
- 4) Package contents
- 5) Controls and connections
- 6) Charging the SurfTab
- 7) Switching on the SurfTab
- 8) Elements on the home screen
- 9) Using the touch screen
- 10) Personalising the home screen
- 11) Setting up a screen lock
- 12) Connecting to the Internet via WiFi
- 13) Connecting to the Internet via 3G
- 14) Setting up/removing an email account
- 15) Installing/uninstalling apps
- 16) Using navigation
- 17) Using the camera
- 18) Connecting other devices
- 19) Activating standby mode
- 20) Reset and recovery mode
- 21) Switching off the SurfTab
- 22) Notes on copyright and trademarks
- 23) Notes on disposal
- 24) Notes on liability and warranty
EN
16
11) Setting up a screen lock
To make the data on your SurfTab more secure, we recommend that you set up
a screen lock. Please proceed as follows:
a) Select "
SETTINGS" in the applications menu.
b) Drag the list up until you can see the "
SECURITY" menu item. Tap "SECURITY".
c) Now tap "
SCREEN LOCK".
d) Now tap the type of screen lock that you require to then set it up.
Whenever you now unlock the screen, you will be prompted for the form of
identification that you have set up.
If you have forgotten your password, you can reset it using the recovery mode
(see section 20).
12) Connecting to the Internet via WiFi
You can connect your SurfTab to the Internet via WiFi. If you would like to
establish a connection to a new wireless network, proceed as follows:
a) Select "
SETTINGS" from the applications menu or the quick menu. This is where
you will find the "WI-FI" item. Tap "WI-FI".
b) Slide the on/off switch from left to right.
c) All available wireless networks will be displayed in the following window.
d) Tap the network that you would like to connect to.
An input window appears. Enter the network key ("
PASSWORD") for the wireless
network you have selected and tap "CONNECT".
e) Your SurfTab will connect to the Internet via the wireless network you have
selected. You can now surf the Internet using a browser app.
Once you have established a connection to a WiFi network, your SurfTab will
automatically connect to it as soon as it is within reach. It is not necessary to
re-enter the network key.
To save power, it is advisable to turn off the WiFi function when it is not in use.