User manual
Table Of Contents
- 1) About the SurfTab xintron i 10.1 3G
- 2) Safety information
- 3) Technical specifications
- 4) Package contents
- 5) Controls and connections
- 6) Charging the SurfTab
- 7) Switching on the SurfTab
- 8) Elements on the home screen
- 9) Using the touch screen
- 10) Personalising the home screen
- 11) Setting up a screen lock
- 12) Connecting to the Internet via WiFi
- 13) Connecting to the Internet via 3G
- 14) Setting up/removing an email account
- 15) Installing/uninstalling apps
- 16) Using navigation
- 17) Using the camera
- 18) Connecting other devices
- 19) Activating standby mode
- 20) Reset and recovery mode
- 21) Switching off the SurfTab
- 22) Notes on copyright and trademarks
- 23) Notes on disposal
- 24) Notes on liability and warranty
EN
17
13) Connecting to the Internet via 3G
The 3G function on your SurfTab means that you are independent of available
WiFi networks. You connect to the network via your mobile communications
provider.
Inserting the SIM card
Only insert the SIM card when the device is completely switched off.
The card will not be recognised if the device is in standby mode.
It is advisable to use the micro SIM cards intended for the SIM slot rather than
using adapters in order to prevent any mechanical faults.
Insert the SIM card from your data service provider into the SIM slot. The golden
contacts on the SIM card should face downwards and the slanted corner should
be at the top on the left.
The illustration on the SIM slot provides further assistance in inserting the
SIM card.
Do not insert any microSD/SDHC memory cards into the SIM slot! If a memory
card does become stuck in the SIM slot, have it removed by a trained professional.
When you switch on your SurfTab again after inserting the SIM card, you have to
enter the corresponding PIN number.
Defining settings for 3G mode
There are various options for adjusting 3G mode to suit your requirements.
These can be found under "SETTINGS".
SIM cards
Tap
"SIM CARDS" . This opens a menu with the following setting options:
SIM slot 1
Drag the slider beside the "
SIM SLOT 1" to the right in order to activate the data
service.
By tapping the data service provider, you can retrieve and process your
SIM card data.
Data Switch
You can deactivate the data connection by tapping "
DATA SWITCH".