User manual
Table Of Contents
- 1) About the SurfTab xintron i 10.1 3G
- 2) Safety information
- 3) Technical specifications
- 4) Package contents
- 5) Controls and connections
- 6) Charging the SurfTab
- 7) Switching on the SurfTab
- 8) Elements on the home screen
- 9) Using the touch screen
- 10) Personalising the home screen
- 11) Setting up a screen lock
- 12) Connecting to the Internet via WiFi
- 13) Connecting to the Internet via 3G
- 14) Setting up/removing an email account
- 15) Installing/uninstalling apps
- 16) Using navigation
- 17) Using the camera
- 18) Connecting other devices
- 19) Activating standby mode
- 20) Reset and recovery mode
- 21) Switching off the SurfTab
- 22) Notes on copyright and trademarks
- 23) Notes on disposal
- 24) Notes on liability and warranty
EN
23
Editing photos
a) Briefly tap the lower edge of the display to show the task bar. Now tap the
home icon to exit camera mode.
b) Open the gallery by tapping the "
PHOTOS" symbol in the applications menu
or in the quick start bar.
c) Now tap the photo that you would like to edit.
The following symbol appears on the bottom left of the screen:
d) Tap this symbol. Various editing options (regarding exposure, framing,
cropping, colour settings, etc.) are now displayed beneath the photo.
e) Tap the desired option and save your change by tapping the checkmark on
the top right of the screen and then confirming with "
DONE" on the top left.
The SurfTab now saves a new picture. The original picture is not overwritten.
Once you have selected a picture, the same options are available if you swipe
from right to left across the screen in the camera app.
Recording a video
a) Swipe from left to right across the screen and select the “Video” option icon
on the left side of the screen.
b) Then tap the video symbol on the right side of the screen to start recording.
c) Tap the stop symbol (square) on the right side of the screen to stop recording.
Zooming
You can zoom in on or out of your subject both in photo and in video mode.
Move two fingers apart on the screen to zoom in and move two fingers towards
each other again to zoom out.
To exit the camera mode, briefly tap the home icon on the lower edge of the display.
18) Connecting other devices
Connecting the SurfTab to a computer
a) Connect the SurfTab to your computer with the Micro-USB cable provided.
b) A short moment later, the memory of the SurfTab will be shown as an external
drive in your computer’s file explorer. From here you can load, copy, delete
or move files as usual.