User manual
Table Of Contents
- 1) About the SurfTab xintron i 10.1 3G
- 2) Safety information
- 3) Technical specifications
- 4) Package contents
- 5) Controls and connections
- 6) Charging the SurfTab
- 7) Switching on the SurfTab
- 8) Elements on the home screen
- 9) Using the touch screen
- 10) Personalising the home screen
- 11) Setting up a screen lock
- 12) Connecting to the Internet via WiFi
- 13) Connecting to the Internet via 3G
- 14) Setting up/removing an email account
- 15) Installing/uninstalling apps
- 16) Using navigation
- 17) Using the camera
- 18) Connecting other devices
- 19) Activating standby mode
- 20) Reset and recovery mode
- 21) Switching off the SurfTab
- 22) Notes on copyright and trademarks
- 23) Notes on disposal
- 24) Notes on liability and warranty
EN
25
Proceed as follows to connect your SurfTab to a Miracast-enabled television:
a) First, take all of the necessary steps to prepare your Miracast-enabled
television for the Miracast transfer (consult your television’s operating
instructions for details).
b) Select "
SETTINGS" in the applications menu on the SurfTab.
c) Activate the WiFi function on the SurfTab. To do so, select "
WI-FI" and drag
the on/off switch for WiFi from left to right.
d) Further down in the menu column you will find the "
DISPLAY" menu item.
Tap "DISPLAY".
e) Tap "
CAST SCREEN".
f) At the top right of the display you will find 3 vertically stacked dots. Tap here.
g) Tap "
ENABLE WIRELESS DISPLAY" in this window.
h) A list of all available Miracast devices will appear. Tap the device that you
wish to connect to.
i) A short time later, the selected device will show the display of the SurfTab.
If your television device does not support Miracast technology, a "Miracast dongle"
can be used to connect the SurfTab via Miracast. In this case, you must ensure
that the selected dongle is compatible with both the SurfTab and your television.
19) Activating standby mode
If you do not want to use your SurfTab for a while, press the on/off switch briefly
to put the SurfTab into standby mode and save power. To exit standby mode,
briefly press the on/off switch again.
Once you have reactivated the SurfTab, it will initially display the lock screen.
Place your finger on the lock symbol and drag it to the right to the open lock.
Your SurfTab will now display the home screen.
If you previously set up a screen lock, you must now identify yourself using the
method that you chose in order to unlock the SurfTab.
Standby mode is activated automatically when the SurfTab is not used for a certain
time. You can specify the period of time after which the SurfTab automatically goes
into standby mode under "SETTINGS" + "DISPLAY" + "SLEEP".