User manual
Table Of Contents
- 1) About the SurfTab xintron i 10.1 3G
- 2) Safety information
- 3) Technical specifications
- 4) Package contents
- 5) Controls and connections
- 6) Charging the SurfTab
- 7) Switching on the SurfTab
- 8) Elements on the home screen
- 9) Using the touch screen
- 10) Personalising the home screen
- 11) Setting up a screen lock
- 12) Connecting to the Internet via WiFi
- 13) Connecting to the Internet via 3G
- 14) Setting up/removing an email account
- 15) Installing/uninstalling apps
- 16) Using navigation
- 17) Using the camera
- 18) Connecting other devices
- 19) Activating standby mode
- 20) Reset and recovery mode
- 21) Switching off the SurfTab
- 22) Notes on copyright and trademarks
- 23) Notes on disposal
- 24) Notes on liability and warranty
EN
7
Intended operating conditions
Protect the device from extremely high or low temperatures and
fluctuations in temperature. Use it at an ambient temperature
between 10º C and 40º C.
Do not place the device near a heat source and protect it from direct sunlight.
Never expose the device to humidity, condensation or moisture.
Ensure you use and store the device in a dust-free environment.
Power supply
CAUTION
Only ever use the original charger or a charger with the correct
voltage and amperage to prevent damage to the device. If you have
to resort to a universal charger, pay attention to the polarity
of the charging device as well as the voltage and amperage. Your
device may suffer irreparable damage if these specifications are not
properly adhered to.
CAUTION
Do not use or charge the device if the battery is damaged or leaks.
Care and maintenance
Never clean the surface of the device with solvents, paint thinners,
cleaning agents or other chemical products. Use a soft, dry cloth
or a soft paintbrush.
Information on the memory capacities indicated
The storage capacity indicated on the packaging and in the technical
specifications refers to the total storage capacity of your device.
The storage capacity of the device indicated by your operating system
may differ from the stated storage capacity, as a portion of the total
storage is also used by the operating system and system applications.