Operation Manual

5.4 Setting the current time

If you wish to change the time, press

the SET button. One after another,

hours,minutesandseconds(start

automatically after conﬁrmation of

minutes)canbechangedviathe

MODE button. Use the SET button

to conﬁrm your entries and to move

to the next digit.

5.5 Entering and changing the PIN anti-theft protection

YoucanuseaPINtoprotectyourcyclecomputerfrommisuse

by unauthorized people. The cycle computer cannot be used

unlessthecorrectPINisentered.Oncethetimehasbeenset,

youautomaticallyaccessthe“ChangePIN?”window.Hereyou

canenteryourownPINand,ifnecessary,subsequentlychange

it.Ifyoudon’twishtouseaPIN,presstheMODEbutton.Other-

wise, after pressing the SET button, you will be asked to enter

theoldPIN(defaultsettingis“0000“).Tothisend,pressthe

MODE button until such time as the appropriate digit appears

andthenusetheSETbuttontomovetothenextdigit.PINinput

ismonitored.ShouldthePINhavebeenenteredincorrectly,the

message“WrongPIN”appearsforapprox.3secondsandyou

willbeaskedtoreenterthePIN.IfthePINiscorrect,inputanew

PINofyourchoiceasdescribedabove.Oncethelastdigithas

beenconrmedviatheSETbutton,PINentrymustberepeated.

ShouldtherepeatPINentrybeincorrect,youwillreturn

automaticallytothe“ChangePIN?”window.Note down your

personalPINonPage34sothatitisreadilyavailableifrequired!