Operation Manual

5.6 Entering and changing the PIN time
If the bike computer is in Sleep mode and is not ‘awakened’ for a
settime,ithastobereactivatedbyenteringyourPIN.Theperiod
concerned(PINTime)canbe(re)setinthe“SetPINTime”window
–afteryouhavepressedtheSETbutton,youwillbeaskedto
enteryourPIN.AftercorrectPINinput,youautomaticallyaccess
“PINTime”whereyoucanenterthetimeofyourchoiceuptomax.
240minutes.Ifyouwishtodispensewiththesecuringofyourbike
computerviaaPIN,thensetthePINtimeto“000”.
5.7 Energy economy function
An energy economy function is linked to the
PIN-timesetting.
ThePIN-timedefaultsettingis60min.and
thePINdefaultsetting“0000”.Assuch,the
clockisdisplayedinSleepfor60min.,after
which time the clock display shuts down.
Thisperiodoftimecanbeadjustedasde-
scribedabove.IfthePINtimeissetat0,the
energy economy function is deactivated and
the clock is displayed on an ongoing basis.
IfaPINissetat“0000”andaPINtimeat
morethan0,theenergyeconomyfunction
andthePINenquiryareactivated.This
meansthat,oncethePINtimehaselapsed,
the clock display shuts down and the com-
putercanonlybereactivatedviaPINinput.
PresstheMODEbuttontomovebetween
themainfunctions(menus)-see6.1-6.7.
Toenterdigits(time,counterlevels,etc.),
press the MODE button until the given digit
appears. Use the SET button to move to the
next digit and confirm again via SET after the
last digit has been entered.
6. Main menus
?
?
48
49