Operation Manual

3seconds
Pilot
6.5 “Pilot” PILOT menu
Current time
Current speed
Day kilometre coun-
ter(adjustable)
Setting of day kilometre counter
By pressing and holding the SET button for
3seconds,youcanchangethedisplayof
the day kilometre counter in the “Set km”
window(onlypossiblewithdeactivated
stopwatch).Thisfunctionishelpfulifyou
have made a detour, for instance, despite
the fact that you are otherwise following
a road book.
6.7 “Set” SET menu
Changing the presetting
Total ride time
(forBikes1+2)
Current speed
Total kilometres
(forBikes1+2)
By pressing and holding the SET button in
the “SET”menufor3seconds,youthen
have the option of correcting your default
settingsandmakingfurthersetting.Press-
ing the MODE button brings you automati-
cally to the menus “Clock?” “Wheel Size?”
with its submenus “Bike 1” and “Bike 2”
and“Totalkm”oneaftertheother.Pressthe
SET and MODE buttons simultaneously for
3secondstomovetothegeneraldefault
settings(P.40,Point5.ff).
The total kilometre status and total ride
time of the current bike are displayed via
the “Total” menu.
Thetotalkilometrestatuscanbeadjus-
ted via the “Set” menu, enabling you,
for instance, to transfer the kilometre
reading from an old bike computer to
your new TRELOCK computer.
6.6 “Total” TOTAL menu
Total ride time
(ofcurrentbike)
Current speed
Total kilometres of
current bike
If you wish to use your computer on 2 bikes,
you must select the appropriate bike on the
computer prior to starting your ride.
By pressing the SET button,
the bike currently selected
appears on the display.
Use the MODE button to
change bikesand confirm
your selection via the SET
button or, after 5 seconds,
the bike displayed is
automatically confirmed.
52
53