Specification

Version: 1.0
Revision Date: 03/28/2016
000000023904
3/19
4,4'-Methylene
bis(phenylisocyanate)
101-68-8 0.5 - 1.5%
Polymethylene polyphenyl
isocyanate
9016-87-9 0.1 - 1%
1,3,5-Trimethylbenzene 108-67-8 0.1 - 1%
Aluminum oxide 1344-28-1 0.1 - 1%
Crystalline Silica (Quartz)/
Silica Sand
14808-60-7 0.1 - 1%
* All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.
Trade secret information:
** A specific chemical identity and/or percentage of composition has been
withheld as a trade secret.
4. First-aid measures
Ingestion:
Call a POISON CENTER/doctor/.../if you feel unwell. Rinse mouth.
Inhalation:
Call a physician or poison control center immediately. If breathing stops,
provide artificial respiration. Move to fresh air. If breathing is difficult, give
oxygen.
Skin Contact:
If skin irritation occurs: Get medical advice/attention. Destroy or thoroughly
clean contaminated shoes. Immediately remove contaminated clothing and
shoes and wash skin with soap and plenty of water. If skin irritation or an
allergic skin reaction develops, get medical attention.
Eye contact:
Any material that contacts the eye should be washed out immediately with
water. If easy to do, remove contact lenses. If eye irritation persists: Get
medical advice/attention.
Most important symptoms/effects, acute and delayed
Symptoms:
May cause skin and eye irritation.
Indication of immediate medical attention and special treatment needed
Treatment:
Symptoms may be delayed.
5. Fire-fi
g
htin
g
measures
General Fire Hazards:
No unusual fire or explosion hazards noted.
Suitable (and unsuitable) extinguishing media
Suitable extinguishing
media:
Use fire-extinguishing media appropriate for surrounding materials.
Unsuitable extinguishing
media:
Do not use water jet as an extinguisher, as this will spread the fire.
Specific hazards arising from
the chemical:
During fire, gases hazardous to health may be formed.
Special protective equipment and precautions for firefighters