MSDS

Material Safety Data Sheet
VULKEM 116 LV BUFF 30 CTG/CS
Version 1
.3 Print Date 02/26/2010
REVISION DATE: 05/01/2007
2/6 426707 323
Aromatic Polyisocyanate Resin NJ TSRN# 51721300-5270P 30.0 - 60.0
Diisodecyl phthalate 26761-40-0
15.0 - 40.0
Calcium Carbonate (Limestone) 1317-65-3 10.0 - 30.0
Tackifier NJ TSRN# 51721300-5272P
5.0 - 10.0
Thickener NJ TSRN# 51721300-5300P 3.0 - 7.0
Titanium dioxide 13463-67-7 3.0 - 7.0
Crystalline Silica (Quartz)/ Silica Sand 14808-60-7
- <1.0
SECTION 4 - FIRST AID MEASURES
Get immediate medical attention for any significant overexposure.
Inhalation : Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get
medical attention.Move to fresh air. If required, artificial respiration or administration
of oxygen can be performed by trained personnel.
Eye contact : Flush with water for at least 15 minutes while holding eye lids apart. Get medical
attention immediately.
Skin contact : Clean area of contact thoroughly using soap and water. If irritation, rash or other
disorders develop, get medical attention immediately.
Ingestion : Do not induce vomiting unless advised by a physician. Call nearest Poison Control
Center or Physician immediately.
SECTION 5 - FIRE FIGHTING MEASURES
Flash point : Not available.
Method : Not available.
Lower explosion limit : Not available.
Upper explosion limit : Not available.
Autoignition temperature : Not available.
Extinguishing media :
If water fog is ineffective, use carbon dioxide, dry chemical or foam.
Hazardous combustion
products
: Carbon monoxide and carbon dioxide can form.Hydrocyanic acid and
nitrogen oxides can form.
Protective equipment for
firefighters
: Use accepted fire fighting techniques. Wear full firefighting protective
clothing, including self-contained breathing apparatus (SCBA).
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Use appropriate protective equipment. Avoid contact with material. Scrape up and transfer to appropriate
container for disposal.
SECTION 7 - HANDLING AND STORAGE
Prevent inhalation of vapor, ingestion and contact with skin, eyes and clothing. Preferably use entire contents in
one continuous work session. Do not smoke, weld, generate sparks, or use flame near container. Change soiled
work clothes frequently. Clean hands thoroughly after handling Do not store or use near food. Keep container
closed when not in use. Since emptied containers retain product residue and vapor, observe precautions even
after container is emptied. Store under dry warehouse conditions away from heat and all ignition sources.