MSDS

Material Safety Data Sheet
VULKEM 116 LV BUFF 30 CTG/CS
Version 1
.3 Print Date 02/26/2010
REVISION DATE: 05/01/2007
3/6 426707 323
SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Personal protection equipment
Respiratory protection : Wear appropriate, properly fitted NIOSH/MSHA approved organic vapor or
supplied air respirator when airborne contaminant level(s) are expected to
exceed exposure limits indicated on the MSDS. Follow manufacturer's
directions for respirator use.
Hand protection : Use suitable impervious nitrile or neoprene gloves and protective apparel to
reduce exposure.
Eye protection : Wear appropriate eye protection.Use safety glasses if eye contact is likely.
Skin and body protection : Use disposable or impervious clothing if work clothing contamination is likely.
Remove and wash contaminated clothing before reuse.
Protective measures : Use professional judgment in the selection, care, and use.
Engineering measures : Use general ventilation and/ or local exhaust to reduce the airborne
contaminant concentration below the exposure limit listed in the MSDS
Exposure Limits
Chemical Name
CAS Number
Regulation
Limit
Form
Calcium Carbonate
(Limestone)
1317-65-3 OSHA PEL: 5 mg/m3 Respirable fraction.
OSHA PEL:
15 mg/m3 Total dust.
ACGIH TWA:
3 mg/m3 Respirable particles.
ACGIH TWA: 10 mg/m3 Inhalable particles.
OSHA TWA: 15 mg/m3 Total dust.
OSHA TWA:
5 mg/m3 Respirable fraction.
Titanium dioxide 13463-67-7 ACGIH TWA: 10 mg/m3
OSHA PEL: 15 mg/m3 Total dust.
OSHA TWA:
15 mg/m3 Total dust.
OSHA TWA:
5 mg/m3 Respirable fraction.
Crystalline Silica (Quartz)/
Silica Sand
14808-60-7 OSHA TWA: 0.1 mg/m3 Respirable.
OSHA TWA: 0.3 mg/m3 Total dust.
OSHA PEL: 15 mg/m3 Total dust.
OSHA PEL: 5 mg/m3 Respirable fraction.
ACGIH TWA: 0.025 mg/m3 Respirable fraction.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Form : Non-sag gunnable paste
Color : Tan
Odor : PetroleumSolvent
pH : Not available.
Vapour pressure : Not available.
Vapor density : Heavier than air
Melting point/range : Not available.