Instructions

Chapter 3
Settings
24
Ping
This menu allows settings to be made for the ping test.
1. Select the menu point "Ping".
Option
Description
Target
Select the target address to which the ping
is to be sent. Use the option … to select the
list with the target addresses you have
saved.
Count
Number of pings sent.
Pause
Period of time between sending pings in
milliseconds.
Length
Size of ping package sent.
2. Select the desired option.
3. Enter the desired information with the alphanumeric keys.
4. Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
Netmap
This menu allows settings to be made for the netmap test.
Option
Description
Local Network
Scan local network - automatic setting is used.
Custom
Network
Scan specific network area.
1. Select the menu point "Netmap".
2. Select the area to be scanned by
activating or deactivating the option Local
Network or Custom Network. The option
activated is indicated by a check mark in
the box.
3. Select the desired option.
4. Select the desired test parameters or
enter the desired information with the
alphanumeric keys.
Figure 24: Ping
Figure 25: Netmap