Manual

15
158823.02
PoE PRO
EN
HUB (PORT) BLINK
To assist in confirming correct cabling of Ethernet installations, PoE PRO can generate
Ethernet signalling on one end of a cable which causes the port LED of the device connected
to the other end to flash.
Hub (port) Blink is only available when the DATA port is selected.
To switch on Hub Blink:
Press the TOO LS button repeatedly until the Ethernet Device
Indicator flashes.
Press or
• The symbol shows that Hub Blink is switched on.
• The Port Segment of the Ethernet Device Indicator blinks.
• Hub blinking continues until switched o or for a maximum
of 144 minutes.
To switch o Hub Blink:
Press the TOOLS button
• The Ethernet Device Indicator Port Segment stops flashing.
• Hub Blink stops.
Ethernet
Device
Indicator
Port
Segment
Cat 3 65
Cat 5/5e/6/6A 72
Cat 7 79
70
RG59 82
NVP