Manual

7
158823.02
PoE PRO
To test PoE:
• Turn on the PoE PRO tester
• Connect the RJ45 port of the tester to the PoE port or cable to be tested.
• Press the Network button
Above screen is displayed when PoE is detected without an ethernet signal (PoE Injector with
input from a switch). It will be shown for two seconds.
If ethernet is detected, the maximum detected link speed will be shown with the no-load PoE
voltage for two seconds.
PoE TESTING
Unloaded
Voltage
(Voltage detected
when drawing
no power)
PoE Detected
Max
Ethernet
Speed
EN