Owner manual

Rated operational Non-rep. voltage Control input Supply voltage Rated operational
voltage current (50 A)
230VACrms 650Vp 0 - 10VDC 24VAC/DC RJ1P23V50E
4 - 20mA RJ1P23I50E
480VACrms 1200Vp 0 - 10VDC 24VAC/DC RJ1P48V50E
4 - 20mA RJ1P48I50E
600VACrms 1200Vp 0 - 10VDC 24VAC/DC RJ1P60V50E
4 - 20mA RJ1P60I50E
Solid State Relay
Number of poles
Switching mode (Proportional)
Rated operational voltage
Control input type
Rated operational current
Terminal layout
Specifications are subject to change without notice (27.06.2006) 1
• AC semiconductor contactor
• Multi-function - 5 selectable modes of operation:
Phase Angle, Distributed Full Cycle and Burst Control
(1, 3 and 10s)
• Direct copper bonding (DCB) technology
• LED-indication for control and load status
• Operational ratings up to 50 AACrms and 600 VAC
• 4-20mA or 0-10V control input
• Built-in varistor
• Non-repetitive voltage: Up to 1200Vp
• Opto-isolation > 4000VACrms
• Cage clamp terminals
• IP20 protection
Product Description
Ordering Key
The Solitron Midi Analog
Switching is a single-phase
SSR that provides proportional
output power in relation to the
control signal level applied.
This microprocessor-based
device provides for 5 different
switching modes integrated
into one package. A selector
switch on the front of the
device is used for the selection
of the preferred mode of oper-
ation, i.e., either Phase Angle,
Distributed Full Cycle or Burst
Control. This multi-function
selection makes this device
ideal for the control of a variety
of loads, including heaters and
lamps. The control signal can
be either 4 - 20mA or 0 -
10VDC. 4mA or 0V correspond
to zero output power, whilst
20mA or 10VDC correspond to
full output power.
The product is ready to mount
on DIN-rail or chassis and
comes with integral heatsink.
Solid State Relays
SOLITRON MIDI Multi-Function Analog Switching
Type RJ1P
Type Selection
Switching Rated operational Control Rated operational Terminal
mode voltage input current layout
P: Proportional 23: 230VACrms V: 0 - 10VDC 50: 50AACrms E: Contactor
Output 48: 480VACrms I: 4 - 20mA
60: 600VACrms
Selection Guide
RJ 1 P 48 V 50 E
Thermal Specifications
Operating temperature -20 to +60ºC (-4 to +140 ˚F)
Storage temperature -40 to +100ºC (-40 to +212 ˚F)
Insulation
Rated insulation voltage
Input to output ≥ 4000 VACrms
Output to case ≥ 4000 VACrms