Quick Installation Guide 100Base-FX Fiber Converters
Table ofofContents Table Contents Español ..................................................................................................... 1 1. Antes de iniciar .................................................................................. 1 2. Instalación del Hardware ................................................................... 2 Spefications .............................................................................................. 4 Ordering Information.................................
1. Antes de iniciar Contenidos del paquete Convertidor de fibra Guía de instalación rápida Alimentación eléctrica de CA (7,5 CC, 1,5 A) Requisitos mínimos Un ambiente donde no haya generadores de campos electromagnéticos fuertes (como motores), vibraciones, polvo o exposición directa a la luz solar. Un chasis TFC-1600 (opcional) o una superficie firme y nivelada capaz de sostener el peso del Convertidor de fibra.
2. Instalación del Hardware Instalación de 2 convertidores de fibra de forma independiente 1. Conecte el cable de fibra a los convertidores. Para el TFC-110MM/MST/MSC el cable debe ser multimodo. El cable para el TFC-110S15/S30/S60/S100/ S20D3/S20D5/S40D3/S40D5. debe ser de modo sencillo 2. Conecte un cable de ethernet RJ-45 desde el puerto ethernet de los convertidores de fibra hasta un puerto ethernet del conmutador (como el E TEG-224WSplus). 3.
Instalación del convertidor de fibra sobre un chasis 4. Destornille la tapa del compartimiento deseado del chasis. 5. Afloje el tornillo de ajuste manual y saque el convertidor de la caja de metal. 6. Inserte el convertidor de medios en una ranura disponible y apriete el tornillo de ajuste manual.
Specifications Applicable Standards: IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX & 100BASE-FX Fixed Ports: Speed: 1 TX port, 1 FX port 10/20Mbps for half/full-duplex 100/200Mbps for half/full-duplex Forwarding rate: 148,800pps LED Indicators: TFC-110 series Per Unit: Power; Speed (100) Per Port: FDX/COL, LINK/ACT TFC-15MS100 Per Unit: Power Per Port: Link/ACT DIP Switches: TFC-110 series: Duplex (On/half-duplex, Off/full-duplex) TFC-15MS100: None 10BASE-T: 2-pair UTP Cat.
Ordering Information Media Converters Port 1 Port 2 Model Number Speed (Mbps) Cable/Connector Max. Distance Speed (Mbps) Wavelength TFC-110MSC 10/100 Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP 100M 100 1300nm MMF (50µm or 62.5µm ) SC 2 km TFC-110MST 10/100 Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP 100M 100 1300nm MMF (50µm or 62.5µm ) ST 2 km TFC-110MM 10/100 Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP 100M 100 1300nm MMF (50µm or 62.5µm ) MT-RJ 2km TFC-110S15 10/100 Cat.
Troubleshooting Q1: After connecting the Fiber converter, the LEDs do not turn on. What should I do? A1: First, check that the power outlet is receiving power. Second, make sure the power adapter is firmly connected to the Fiber converter and the power outlet. Third, make sure the Ethernet and the Fiber cables are connected. Q2: All the LEDs are on, but I can't make a connection. What should I do? A2: First, verify that you are using the proper fiber cable (e.g.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. Fiber Converters - 5 Year Warranty If a product does not operate as warranted above during the applicable warranty period, TRENDnet shall, at its option and expense, repair the defective product or deliver to customer an equivalent product to replace the defective item.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland . UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.