Installation guide

After connecting the Switch to a power outlet, the LEDs do not turn on.
Check the connection of the external power adapter to the TE100-S16Eg and the power
outlet. Also check that the power outlet is receiving power.
When I connect a computer to the Switch's port, the Link/ACT LED turns on, but the
100Mbps LED remains off.
When the 100Mbps LED is off, the computer's connection speed is 10Mbps.
After I connect my PCs to the Switch, I am unable to share files.
1. Check the LEDs on the Switch. Make sure the Link/ACT LED is on.
2. Check the network cable. The minimum length of the cable is 1.5 meters and the
maximum length of the cable is 100 meters.
3. Disable any software firewall program.
4. Verify that you have file sharing enabled. Please contact your Operating System support
for more information.
After I connect my PCs to the Switch, I can only get onto the Internet from one computer.
The Switch was not designed to share Internet between multiple computers. You need to get
an Internet router such as the TW100-S4W1CA.
Where is the uplink port located on the Switch?
Since all the ports on the Switch are Auto-MDIX, any of the ports can be used as an uplink
port.
If you still encounter problems or have any questions regarding the TE100-S16Eg please contact
TRENDnet's Technical Support Department.
Troubleshooting
5