User`s guide

TRENDnet User’s Guide

TEW-815DAP

• WPA Encryption: Select WPA AES or TKIP encryption you would like to use.

• WPA passphrase: Enter the security password. This is the password or key that is

used to connect your computer to this access point wirelessly.

• Network Key Rotation: Enter the key rotation interval to use for WPA encryption.

Selecting WPA/ WPA2/WPA2 Mixed (WPA2 recommended):

The following section outlines options when selecting WPA (EAP or RADIUS). This

security type is also known as EAP (Extensible Authentication Protocol) or Remote

Authentication Dial-In User Service or RADIUS.

Note: This security type requires an external RADIUS server, Pre-Shared Key only requires

you to create a passphrase.

• WPA Encryption: Select WPA AES or TKIP encryption you would like to use.

• Network Key Rotation: Enter the key rotation interval to use for WPA encryption.

• RADIUS Server Address: Enter the IP address of the RADIUS server. (e.g.

192.168.10.250)

• RADIUS Port: Enter the port your RADIUS server is configured to use for RADIUS

authentication.

Note: It is recommended to use port 1812 which is typical default RADIUS port.

• RADIUS Key: Enter the shared secret used to authorize your access point with your

RADIUS server.

Connect wireless devices to your access point

A variety of wireless network devices can connect to your wireless network such as:

Gaming Consoles

• Internet enabled TVs

• Network media players

• Smart Phones

• Wireless Laptop computers

• Wireless IP cameras

Each device may have its own software utility for searching and connecting to available

wireless networks, therefore, you must refer to the User’s Manual/Guide of your

wireless client device to determine how to search and connect to this access point’s

wireless network.

See the “

Appendix” on page 49 for general information on connecting to a wireless

network.