I206 V.92 PCI MODEM USER’S MANUAL TABLE OF CONTENT 1. Contents of Package ...............................................................2 2. Comprehensive Modem Installation Instructions .................2 2.1 System Requirements ...........................................................2 2.2 Hardware Installation ...........................................................3 2.3 System Setup .......................................................................4 2.3.
I206 V.92 PCI MODEM USER’S MANUAL Section 1 Contents of Package ! One V.92 PCI bus window modem ! One telephone cable ! One CD-ROM disk comprises Communication software, Modem Driver & User's Manual ! Quick installation guide Please contact the place of purchase if any of the above listed items are missing. Section 2 Comprehensive Modem Installation Instructions Section 2.
I206 V.92 PCI MODEM USER’S MANUAL Section 2.2 Hardware Installation Please refer to Fig. 2 - 1 and proceed to following steps for how to insert your modem into the computer and connect telephone wire and audio accessories. Model: I206 FIGURE 2-1 Internal modem diagram 1. Turn off and unplug your computer from the AC outlet. 2. Unplug any peripheral devices (keyboard, monitor, etc.) from your computer to avoid the risk of electric shock. 3.
I206 V.92 PCI MODEM USER’S MANUAL Section 2.3 System Setup Section 2.3.1 Setup instructions for Windows 98SE STEP 1. After you complete the modem hardware installation and turn on your PC, Windows system will automatically detect your new added devices. Windows system will then prompt you with an Add New Hardware Wizard screen as shown in figure. Then click on Next. STEP 2.
I206 V.92 PCI MODEM USER’S MANUAL STEP 4. Then, a prompt screen indicates Windows has found the best driver for your modem as shown in figure. Please make sure the source of your driver is correct then click on Next. STEP 5. Select International Settings tab as shown in figure. Make sure the country setting is correct (default United States of America). Changes of the setting will effect to modem performance. Please select a correct option to match your location and click OK. STEP 6.
I206 V.92 PCI MODEM USER’S MANUAL Section 2.3.2 Uninstall Modem from Windows 98SE In any reason, you want to remove or reinstall the modem. Please follow the steps below to completely uninstall the modem. STEP 1. Click on Start # Settings # Control Panel as shown in figure. STEP 2. Click on Add/Remove Programs icon in Control Panel window. STEP 3. Click Install/Uninstall tab and choose Intel(R) 537EP Modem. Then click Add/Remove…. Button to uninstall the modem. Rev.1.00.2.1.57.
I206 V.92 PCI MODEM USER’S MANUAL Section 2.3.3 STEP 1. Setup instructions for Windows Me After you complete the modem hardware installation and turn on your PC, Windows system will automatically detect your new added devices “PCI Card”. A prompt screen will ask you to select Automatic search for a better driver or Specify the location of the driver, so you can select the driver you want. Please select the Specify the location of the driver [Advanced] as shown in figure. Then click on Next. STEP 2.
I206 V.92 PCI MODEM USER’S MANUAL STEP 4. Then, an Intel(R) 537EP Modem Settings screen show International Settings tab as shown in figure. Make sure the country setting is correct (default United States of America). Changes of the setting will effect to modem performance. Please select a correct option to match your location and click OK. STEP 5. Click on Finish to complete the modem installation. Rev.1.00.2.1.57.
I206 V.92 PCI MODEM USER’S MANUAL Section 2.3.4 Uninstall Modem from Windows Me In any reason, you want to remove or reinstall the modem. Please follow the steps below to completely uninstall the modem. STEP 1. Click on Start # Settings # Control Panel as shown in figure. STEP 2. Click on Add/Remove Programs icon in Control Panel window. STEP 3. Click Install/Uninstall tab and choose Intel(R) 537EP Modem. Then click Add/Remove…. Button to uninstall the modem. Rev.1.00.2.1.57.
I206 V.92 PCI MODEM USER’S MANUAL Section 2.3.5 STEP 1. Setup instructions for Windows 2000 After you complete the modem hardware installation and turn on your PC. Windows system will automatically detect your new added devices. Windows system will then prompt you with a Found New Hardware Wizard screen, as shown in figure. STEP 2.
I206 V.92 PCI MODEM USER’S MANUAL Insert the Modem Driver CD-ROM disk attached with your modem into the CD-ROM drive device then click on Next. STEP 4. Then a prompt screen will ask you to locate the driver for your modem as shown in figure. Please browse the CD-ROM disk directory at :\drivers\Win2K&XP. Then click on OK. STEP 5. Then, a prompt screen will advise you and confirm the modem’s driver has been found, as shown in figure. Then click on Next. STEP 6.
I206 V.92 PCI MODEM USER’S MANUAL STEP 7. Click on Finish to complete the modem installation. STEP 8. Right click on My Computer icon in Desktop window as shown in figure. Then choose Properties. STEP 9. Choose Hardware tab and then click on Device Manager…. Button. Rev.1.00.2.1.57.
I206 V.92 PCI MODEM USER’S MANUAL STEP 10. Expand Modems item and right click on Intel(R) 537EP Modem device. Then choose Properties. STEP 11. Choose Advanced tab as shown in figure. Make sure the country/region setting is correct (default United States of America). Changes of the setting will effect to modem performance. Please select a correct option to match your location and click OK. Rev.1.00.2.1.57.
I206 V.92 PCI MODEM USER’S MANUAL Section 2.3.6 Uninstall Modem from Windows 2000 In any reason, you want to remove or reinstall the modem. Please follow the steps below to completely uninstall the modem. STEP 1. Click on Start # Settings # Control Panel as shown in figure. STEP 2. Click on Add/Remove Programs icon in Control Panel window. STEP 3. Choose Intel(R) 537EP Modem and then click on Change/Remove button as shown in figure. Rev.1.00.2.1.57.
I206 V.92 PCI MODEM USER’S MANUAL Section 2.3.7 STEP 1. Setup instructions for Windows XP After you complete the modem hardware installation and turn on your PC, Windows system will automatically detect your new added devices. Choose Install from a list or specific location [Advanced] as shown in figure, then click on Next button. STEP 2. Select the directory of modem driver like :\drivers\Win2K&XP as shown in figure. Then click on Next. STEP 3.
I206 V.92 PCI MODEM USER’S MANUAL STEP 4. System has completed the modem driver installation. Then click on Finish. STEP 5. Click Start # Control Panel in Taskbar as shown in figure. STEP 6. Click on Phone and Modem Options icon in Control Panel window as shown in figure. Rev.1.00.2.1.57.
I206 V.92 PCI MODEM USER’S MANUAL STEP 7. Choose Intel(R) 537EP Modem device and click Properties button in Modems tab. STEP 8. Make sure the country/region setting is correct (default United States) in Advanced tab. Changes of the setting will effect to modem performance. Please select a correct option to match your location and click OK. Rev.1.00.2.1.57.
I206 V.92 PCI MODEM USER’S MANUAL Section 2.3.8 Uninstall Modem from Windows XP In any reason, you want to remove or reinstall the modem. Please follow the steps below to completely uninstall the modem. STEP 1. Click Start # Control Panel in Taskbar as shown in figure. STEP 2. Click on Add or Remove Programs icon in Control Panel window as shown in figure. STEP 3. Choose Intel(R) 537EP Modem device and then click on Change/Remove button as shown in figure. Rev.1.00.2.1.57.
I206 V.92 PCI MODEM USER’S MANUAL Section 2.4 Testing Your Modem Before you set up your software, start with a quick test to check that your modem is working. Once you have determined that your modem is setup properly, go on to Section 2.5 Install Communication Software to install your communications software. If you are having problems, see Section 3 Troubleshooting. Click on Start and point to Setting. Then click on Control Panel. When the Control Panel window opens.
I206 V.92 PCI MODEM USER’S MANUAL Section 3 Troubleshooting Your modem is designed to provide reliable and trouble-free functionality, however, should you experience any difficulty, the information contained in this section will assist you in determining and resolving the source of the problem. Problem: Modem does not respond to AT commands Possible solutions: 1. Make sure the modem is not configured with a conflicting COM port and IRQ setting.
I206 V.92 PCI MODEM USER’S MANUAL at the same time may cause communication problem. Close unnecessary application in your system. Problem: Modem exhibits poor voice recording or playback Possible solutions: 9. Make sure the correct modem type is selected in the Voice/FAX software. Volume adjustment is available in control panel. 10. Make sure your computer is fast enough to handle voice operations (38.4 Kbps). Voice operations are CPU intensive and require a better CPU sharing when running under Windows.
I206 V.92 PCI MODEM USER’S MANUAL Appendix 1 Modem Specifications Modulation standard : V.92, V.90, K56 flex, V.34+, V.34, V.32bis, V.32, V.29, V.27ter, V.22bis, V.23, V.22, V.21, V.17, Bell212/103 Compression : V.42bis, MNP Class 5 Error Correction : V.44, V.42, MNP Class 2-4 Host Interface : PCI bus FAX Group : Group III FAX Command : EIA/TIA 578 class 1 Power : 0.
I206 V.92 PCI MODEM USER’S MANUAL FCC Class B statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
I206 V.92 PCI MODEM USER’S MANUAL NOTICE: The Load Number (LN) assigned to each terminal device denotes the percentage of the total load to be connected to a telephone loop which is used by the device, to prevent overloading. The termination on a loop may consist of any combination of devices subject only to the requirement that the sum of the Load Numbers of all the devices does not exceed 100.
