TEW-611BRP Quick Installation Guide Version 08.09.05 TRENDnet TRENDware, USA What's Next in Networking Copyright ©2005. All Rights Reserved. TRENDware International, Inc.
Table of Contents English ................................................................................................................... 1. Prepare for Installation ................................................................................... 2. Install Hardware ............................................................................................. 3. Configure your AP/Router .............................................................................. 4.
English QIG 1. Prepare for Installation Thank you for purchasing the TEW-611BRP. This Wireless AP/Router will allow you to securely share your Internet connection, files, and other resources with multiple users. This guide will help you set up and configure your AP/Router. Following the installation instructions should be quick and easy. If you run into problems, please refer to the Troubleshooting section or the more detailed installation procedures on the User's Guide CD-ROM.
Collect Account Information from Internet Service Provider (ISP) During the installation of your AP/Router, the configuration utility will ask you to specify your ISP connection type. Therefore, please verify your Cable or DSL Internet broadband connection with your ISP and ensure you have all the information for one of the following connection types: Dynamic IP Cable Connection Nothing is required. The IP address will be automatically assigned by your ISP.
2. Install Hardware 1. Connect one RJ-45 network cable from the Cable/DSL Modem's Ethernet port to the WAN port on the AP/Router. 2. Connect a different RJ-45 network cable from one of the AP/Router's LAN ports to your computer's network port. 3. Turn on your Cable/DSL modem. 4. Connect the included Power Adapter from your AP/Router to a power outlet; your AP/Router should turn on. 5.
3. Configure your AP/Router The following section will help you configure your AP/Router to connect to the Internet and your PCs. The setup differs and is dependent on the type of Internet connection you have. If you are not sure what type of connection you have, please contact your ISP to obtain the required information, which is listed in the Prepare for Installation section at the beginning of this Quick Installation Guide. 1. Open your web browser, type http://192.168.0.
4. Click Next. 5. If you want to change your password for your router, then type the new password in the Password and Verify Password fields. Otherwise, click Next. 6. Choose the appropriate Time Zone from the pull down menu, and click Next.
7. Select your Connection Type [ DHCP Connection (Dynamic IP Address), Username/Password Connection (PPPoE), Username/Password Connection (PPTP), Username/Password Connection (L2TP), Static IP Address Connection] and proceed to appropriate subset of instructions listed below. DHCP Connection (Dynamic IP Address) 8. Select DHCP Connection (Dynamic IP Address) as the Connection Type and click Next.
. If your ISP requires you to enter a MAC Address and Hostname, enter the information in the appropriate fields. Otherwise, click Next. 10. Go to step 22. Username/Password Connection (PPPoE) 11. Select Username/Password Connection (PPPoE) and click Next.
12. Type your username and password in the appropriate fields. If you ISP requires you to enter your Service Name, type the information in the appropriate field. Otherwise, click Next. 13. Go to step 22. Username/Password Connection (PPTP) 14. Select Username/Password Connection (PPTP) as the connection type and click Next.
15. Enter your PPTP IP Address, PPTP Subnet Mask, PPTP Gateway IP Address, PPTP Server IP Address, Username, and Password. Click Next. 16. Go to step 22. Username/Password Connection (L2TP) 17. Select Username/Password Connection (L2TP) as the Connection Type and click Next.
18. Enter your L2TP IP Address, L2TP Subnet Mask, L2TP Gateway IP Address, L2TP Server IP Address, Username, and Password. Click Next. 19. Go to step 22. Static IP Address Connection 20. Select Static IP Address Connection as the conection type and click Next.
21. Enter your IP Address, Subnet Mask, Gateway Address, Primary DNS Address and Secondary DNS Address that is provided by your ISP. Click Next. 22. Click Connect. 23. After being redirected to the login page, close your web browser and proceed to the next section.
4. Configure your Wireless Networking Adapter In this example, the TEW-601PC Wireless Utility will connect to the TEW-611BRP. 1. Double-click the wireless computer icon in your system tray (next to the clock in the bottom right corner of your screen). 2. Click Site Survey, click Refresh, and select the desired access point. Click Connect. 3. Click OK. 4. Please verify your connection status. Congratulations! Installation is now complete.
Troubleshooting For help with the TEW-611BRP's configuration and advanced settings, please refer to the User's Guide CD-ROM. Q1. I specified the IP address “192.168.0.1” in my web browser, but an error message says "The page cannot be displayed." How can I get into the TEW-611BRP web configuration page? A1.
TRENDnet TRENDware, USA What's Next in Networking @ Product Warranty Registration Please take a moment to register your product online. Go to TRENDware’s website at http://www.TRENDNET.com TRENDnet Technical Support US/Canada Support Center Contact Telephone: 1(310) 626-6252 1(310) 626-6267 Fax: Email: support@trendnet.
