Quick Installation Guide TE100-MP1UN H/W: V1.
Table of Contents English ....................................................................................................................................................... 1 1. Before You Start ................................................................................................................................ 2. How to Install ..................................................................................................................................... 3. Printing .................
1. Before You Start Package Contents ? TE100-MP1UN ? Utility CD-ROM ? Multi-Language Quick Installation Guide ? Power Adapter (5V, 2A) System Requirements CD-ROM Drive ? ? CPU: 300Mhz or above/ 800Mhz or above (Windows Vista) ? Memory: 256MB RAM or above/ 512MB RAM or above (Window Vista) ? Windows 2000/XP/2003 Server/Vista (32bit) Note: 1. Do not perform the following unless instructed to do so: 1. Install the utility 2. Connect printer to Print Server 3. Connect computer to Print Server 2.
2. How to install 1. Install the printer drivers to your computer. Then power down the printer and disconnect the printer from your computer. Note: Please refer to your printer's manual for printer installation instructions. 2. Insert the Utility CD-ROM into your CD-ROM drive. 3. Click Run Autorun.exe (Windows Vista only). 4. Click Install Utility. Then click Setup Wizard. 5. Connect the USB Printer to the USB port on the Print Server. Then click OK.
6. Connect a RJ-45 network cable from a Switch/Router to the LAN port of the Print Server. 7. Connect a RJ-45 network cable from a Switch/Router to the Ethernet port on your computer and then click OK. 8. Power ON your printer and then click OK. 9. Connect the AC Power Adapter to the Print Server and then to a power outlet. Then click OK. 10. Verify the Status LED is on and the Error LED if off on the Print Server. Then click Yes.
11. Select the print server and then click Next. 12. Configure the IP address of the print server to be in the same subnet as your network and then click Next. 13. Copy down the IP address and then click Next. 14. Click Finish.
15. Click Yes. 16. Click Next and then follow the InstallShield Wizard instructions. 17. Click Finish. 18. Click on Resource and then click Connect.
19. The printer driver wizard appears. Follow the printer driver wizard to install the printer. 20. Click OK. Print Server configuration is now complete. For detailed information regarding the TE100-MP1UN configuration and advanced settings, please refer to the User's Guide on the Utility CD-ROM or TRENDnet's website at www.trendnet.com Register Your Product To ensure the highest level of customer service and support, please take a moment to register your product Online at: www.TRENDnet.
3. Printing Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it. 1. Click on Resource and then click Connect. 2. Status will now show the client computer and IP address that is currently using the printer. 3. User can now start printing. 4. Click Disconnect.
4. Faxing Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it. 1. Click on Resource and then click Connect. 2. Status will now show the client computer and IP address that is currently using the printer. 3. User can now start Faxing. Follow the Multifunction printer software instructions for faxing. 4. Click Disconnect.
5. Scanning Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it. 1. Click on Resource and then click Connect. 2. Status will now show the client computer and IP address that is currently using the printer. 3. Place the document on the MultiFunction Printer's Scanner bed. Then follow the Multifunction printer software instructions for scanning. 4. Click Disconnect.
Troubleshooting Q1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu does not appear automatically. What should I do? A1. For Windows 2000/XP, if the window does not appear automatically, click Start, click Run, and type D:\autorun.exe where "D" in "D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register 20675 Manhattan Place Torrance, CA 90501 USA Copyright ©2008. All Rights Reserved. TRENDnet.
