Quick Installation Guide TEW-421PC TEW-423PI
Table ofofContents Table Contents English ..................................................................................................... 1. Before You Start ................................................................................ 2. How to Install ..................................................................................... 3. Using the Wireless Adapter .............................................................. 1 1 2 6 Troubleshooting ............................................
1. Before You Start Package Contents TEW-421PC/TEW-423PI Utility & Driver CD-ROM Quick Installation Guide System Requirements 32-bit CardBus Type II Card slot (TEW-421PC) 32-bit PCI 2.2 slot (TEW-423PI) CD-ROM Drive CPU: Intel Pentium 300MHz or above Memory: 32MB RAM or above Windows XP/2000/ME/98SE Application Workstation with Wireless PCI Adapter Internet (TEW-423PI) Cable/DSL Modem 54Mbps 802.
2. How to Install Important! DO NOT install the PCI adapter or PC Card in the computer until instructed to do so. For Windows Users 1. Insert the Utility & Driver CDROM into your computer's CDROM Drive and then click Install Utility. 2. Follow the InstallShield Wizard instructions and then click Finish. 3. Select the appropriate country domain and then click OK.
Note: Please refer to your computer's user manual regarding hardware installation. Then proceed to the appropriate section below. TEW-421PC 4. Shutdown your computer. 5. Insert PC Card firmly into an available PC Card slot on the notebook PC and then turn ON the computer and wait until the Windows desktop appears. 6. Go to Step 10. TEW-423PI 7. Shutdown your computer. 8. Open your computer's case. 9.
Note: For installation instructions for Windows 98SE and ME, refer to the User Guide on the Utility and User Guide CD-ROM. For Windows 2000, skip to step 14. For Windows XP, continue on to step 10. Windows XP 10. The Found New Hardware Wizard appears. Select No, not this time and then click Next. 11. Click Install the software automatically (Recommended) and then click Next. 12. Select the Windows XP drivers and then click Next. 13. Click Finish.
Windows 2000 14. The Found New Hardware Wizard appears. Click Next. 15. Select Search for a suitable driver for my device (recommended) and then click Next. 16. Click Next. 17. Click Next. 18. Click Finish. Your installation is now complete.
3. Using the Wireless Adapter Note: Windows XP Wireless Zero Configuration utility must first be disabled. If it is already disabled, then go to Step 3. 1. Go into the Control Panel and double-click the Network Connections icon. Right-click Wireless Network Connection icon and click Properties. 2. Click the Wireless Networks tab, uncheck Use Windows to configure my wireless network settings, and then click OK. 3. Double-click the Wireless icon in your system tray.
4. Click Site Survey. 5. Click the SSID that matches your wireless access point and then click Connect. 6. Set Profile settings of the wireless network and then click Apply. Wireless configuration is now complete. For detailed information regarding the TEW-421PC/TEW-423PI configuration and advanced settings, please refer to the User's Guide included on the Utility & Driver CD-ROM or TRENDnet's website at www.trendnet.
Troubleshooting Q1: I inserted the TEW-421PC/TEW-423PI CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. What should I do? A1: If the installation menu does not appear automatically, click Start, click Run, and type D:\Autorun.exe where "D" in "D:\Autorun.exe" is the letter assigned to your computer's CD-ROM Drive. Then click OK to start the installation.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland . UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.
