user manual

User Manual
TEW-455APBO High Power Wireless Outdoor PoE Access Point
74
5.4 System Status
This section breaks down into subsections of System Overview, DHCP Clients, Extra Information and Event Log.
5.4.1 System Overview
Detailed information on System, WAN Information, LAN Information and CPE Wireless Information can be
reviewed via this page.
 System : Display the information of the system.
 System Name : The name of the system.
 Operating Mode : The mode currently in service.
 Location : The reminding note on the geographical location of the system.
 Description : The reminding note of the system.
 Firmware Version : The current firmware version installed.
 Firmware Date : The build time of the firmware installed.
 Device Time : The current time of the system.
 System Up Time : The time period that system has been in service since last reboot.
 WAN Information : Display the information of the WAN interface.
The WAN port specified Dynamic IP, the Release and Renew button will be show-up, click Release button
to release IP address of WAN port, Renew button to renew IP address through DHCP server.
The WAN port specified PPPoE, and the Connect and DisConnect button will be show up. Click “Connect”
button to assigned IP address from PPPoE server, “DisConnect” button to release IP address of WAN port.