Quick Installation Guide TK-803R TK-1603R
Table of Contents English 1. Before You Start 2. How to Install 3. Operation 1 1 2 4 Technical Specifications Troubleshooting 7 8 Version 08.14.
1. Before You Start ENGLISH Package Contents ? TK-803R/TK-1603R ? Multi-Language Quick Installation Guide ? Rack mount kit FRANÇAIS ? AC Power Adapter (9V DC, 1A) System Requirements DEUTSCH ? PS/2 or USB Keyboard ? PS/2 or USB Mouse ? VGA Compatible Monitor ? USB/ VGA KVM cables (e.g.
2. How to Install ENGLISH 1. Turn OFF all computers and their peripherals, and then disconnect all power cords. DEUTSCH FRANÇAIS 2. Connect the shared PS/2 or USB keyboard, monitor, and PS/2 or USB mouse to the KVM switch's Console Port. (TK-1603R shown) ESPAÑOL 3. Connect the included AC Power Adapter to the KVM switch and then to a power outlet. ÐÓÑÑÊÈÉ 4. Use the KVM cables to connect each computer to the KVM switch. 5.
The KVM Switch can be mounted in an EIA standard-size, 19-inch rack, which can be placed in a wiring closet with other equipment. Note: If you would like to mount the KVM switch to a EIA 19” equipment rack, install the included mounting brackets to the sides of the KVM switch, secure them with the screws provided, and then mount the KVM switch to the equipment rack with the hardware provided by the equipment rack manufacturer. ÐÓÑÑÊÈÉ ESPAÑOL DEUTSCH FRANÇAIS ENGLISH Rack Mount 1.
Note: To switch between computers, you can use the front-panel push buttons or the Hot Key commands. ENGLISH 3. Operation LED Indicators FRANÇAIS Red LED light: KVM cable is connected and PC is powering the KVM switch. ESPAÑOL DEUTSCH Green LED light: Indicates the selected PC port is active, whether the computer is turned on or off. ÐÓÑÑÊÈÉ Push Buttons Press the push buttons to switch between computers.
ENGLISH FRANÇAIS Hot Key Commands A keyboard hot key command consists of three keystrokes: Hot Key command = Scroll Lock + Scroll Lock + Command key(s) After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key again. You then have another 2 seconds to press a command key. A beep confirms that the KVM switch is in "Hot Key" mode. If you do not press a key within 2 seconds, the switch will exit hot key mode.
Front-Panel Buttons Hot Keys Command Description TK-803R Scroll Lock + Scroll Lock + Y Select PC TK-1603R Press the Push Button for a specific port to switch to that port ENGLISH Quick Reference Sheet for TK-803R/TK-1603R Select the active PC channel (YZ)= 2-digit channel number Next lower channel Scroll Lock + Scroll Lock + --- Select the next lower PC channel --- Select the next higher PC channel (Arrow up) Next higher channel Scroll Lock + Scroll Lock + FRANÇAIS Scroll Lock + Scroll
Technical Specifications Management: TK-803R: 8 computers TK-1603R: 16 computers Console Port Connectors: 1 x USB keyboard Type A 1 x USB mouse Type A 1 x PS/2 keyboard 6-pin mini din female 1 x PS/2 mouse 6-pin mini din female 1 x VGA HDB 15-pin female PC Port Connectors: TK-803R: 8 x VGA HDB 15-pin female TK-1603R: 16 x VGA HDB 15-pin female Video Resolution: 2048 x 1536 Port Selection: Push Button and Hot Key Commands LED: Per Port : PC Link (Green) ; PC Active (Red) Keyboard Status: Save a
Troubleshooting Do I need to use the included external AC adapter? It is recommended that you use the included external AC adapter with the TK-803R/TK-1603R KVM switch. I have the KVM switch connected properly, but my USB keyboard and mouse don't work. 1. Make sure your USB port is working properly by testing it with your other USB devices. 2. Once you confirm that the USB port is functional, please reboot your computers, and try to use the KVM switch again. 3.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDNET'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register Copyright ©2009. All Rights Reserved. TRENDnet.
