Quick Installation Guide: Version v1.0R A

1. All the settings are correct, but I can not make a wireless connection to the

Access Point.

Double check that the wireless LED on the Access Point is lit.

2. Power cycle the Access Point. Unplug the power to the Access Point. Wait 15

seconds, then plug the power back in.

3. Contact the manufacturer of your wireless network adapter. Make sure the

wireless network adapter is configured with the proper SSID. The default SSID

of the Access Point is TRENDnet650AP. If you have enabled any encryption

on the Access Point, make sure to configure the wireless network adapter with

the same security key.

2. I am trying to connect additional wireless adapters, but I don't remember the

encryption (network) key. What should I do?

From a wired computer, log on to the access point configuration page. Click

Wireless Security. The encryption key will be listed here.

3. I have a wireless adapter that supports WiFi Protected Setup (WPS) push

button setup. How do I setup WPS between the TEW-650AP and my wireless

adapter?

1. Press on the WPS button on the front of the TEW-650AP for 10 seconds.

2. Refer to your wireless adapters for instructions on setting up WPS.

4. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the

installation menu does not appear automatically. What should I do?

1. For Windows 7, if the installation menu does not appear automatically, click on

the Windows Icon on the bottom left hand corner of the screen, click the

“Search programs and files” box, and type D:\autorun.exe, where “D” in

“D:\autorun.exe” is the letter assigned to your CD-ROM Driver, and then press

the ENTER key on your keyboard

2. For Windows Vista, if the installation menu does not appear automatically, click

on the Windows Icon on the bottom left hand corner of the screen, click on the

“Start Search” box, and type D:\autorun.exe, where “D” in “D:\autorun.exe” is the

letter assigned to your CD-ROM Drive, and then press the ENTER key on your

keyboard.

3. For Windows XP/2000 if the window does not appear automatically, click Start,

click Run and type D:\autorun.exe where “D” in “D:\autorun.exe” is the letter

assigned to your CD-ROM Drive, and then press the ENTER key on your

keyboard.

’

Troubleshooting