Quick Installation Guide: Version v1.0R EU

3
6. Connect a RJ-45 cable from a LAN port on your
Router to the Ethernet port on your computer.
5. Connect the provided RJ-45 cable from a LAN
port on your Router to the LAN port on the
TEW-650AP. Then click Next.
8. Select the TEW-650AP from the list and then
click Configure.
9. Enter a password and then click Login. By
default, there is no password.
7. Connect the Power Adapter to the Access
Point and then to a power outlet. Verify that the
power switch is set to the on position. and then
click Next.