Quick Installation Guide TEW-655BR3G 1.
Table of Contents English 1. Before You Start 2. Hardware Installation 3. Configure the TEW-655BR3G 4. LEDs 1 1 4 6 10 Troubleshooting Wireless Tips 11 13 Version 03.17.
1. Before You Start Package Contents TEW-655BR3G ? ? CD-ROM (User’s Guide) ? Multi-Language Quick Installation Guide ? Cat.5 Ethernet Cable (1.5m/ 6ft) ? Power Adapter (5V DC, 2.5A) ? Lithium Ion Battery (3.7V, 1700mAh) System Requirements A computer with a wireless network adapter properly installed. ? ? Web Browser: Internet Explorer (6.
Collect Internet Service Provider (ISP) Information During the installation of your 150Mbps Mobile Wireless N Router, the Setup Wizard will automatically detect your ISP connection type. If the router cannot detect your ISP connection type, you can manually specify the connection type. Please verify your Internet connection type with your ISP and ensure you have all the information for one of the following connection types: 1. 3G (Auto Detection) connection Pin Code (Optional): ________________ 2.
6. PPPoE connection Account : _________ Password: ________________ Primary DNS:_____. _____._____._____ Secondary DNS:_____. _____._____._____ Service Name (Optional): ________________ Assigned IP Address (Optional): ________________ 7. PPTP connection IP Mode: Dynamic IP Address or Static IP Address My IP Address:_____. _____._____._____ (e.g. 215.24.24.129) My Subnet Mask: _____. _____._____._____ Gateway IP: ____. _____._____._____ Service IP Adress / Name: ________________ PPTP Account:_____. _____.
2. Hardware Installation 1. Verify that you have an Internet connection when connecting the 3G USB adapter to your computer. Open your browser (e.g. Internet Explorer) and type in a URL (e.g. http://www.trendnet.com) in the address bar. Note: You may need to activate your Internet connection. Please contact your ISP for more information. 2. Remove the battery lid. The battery lid is located on the bottom of the router. 3. Insert the battery into the router. 4.
5. Connect one end of the provided RJ-45 cable to the TEW-655BR3G's Ethernet port. Connect the other end of the cable to the computer's Ethernet port. 6. Connect the AC Power Adapter to the wireless router and then to a power outlet. 7. If you are using the TEW-655BR3G for the first time, you will need to charge your battery for 8 hours. 8. Connect your 3G USB adapter to the USB port on the TEW-655BR3G. 9. Move the Power switch to the on position. 10.
3. Configure the TWE-655BR3G Note: 1. Gather all information related to your Internet Connection before you start. If necessary, contact your Internet Service Provider (ISP). 2. Below are steps for connecting to a 3G Internet connection. For instructions connecting to a Broadband Internet connection, please see question 5 in the Troubleshooting section. 1. Open your web browser, type http://192.168.10.1 in the Address bar, and then press Enter. 2. Enter the System Password, and then click Login.
5. Enter the Old password (By default, the Password is admin), enter a New Password, reconfirm the New Password and then click Next. 6. Select your Time Zone and then click Next. 7. Select Wireless WAN for WAN Interface. Select 3G or iBurst (the example shown is for 3G). Then click Next. Configure the settings based on information provided by your ISP. Follow the wizard instructions to complete the configuration. Note: Each WAN type may have different options. 8.
9. Select the desired Authentication mode, select the desired Encryption type and enter characters for your Pre-Shared key and then click Next. For WPA-PSK or WPA2-PSK, the Pre-Shared Key must be between 8 and 63 ASCII or 64 HEX characters. Make sure to copy down the Pre-Shared Key. 10. Check Do you want to proceed with network testing? and then click Apply Settings. 11. Wait around 43 seconds while the router reboots. 12. Wait around 15 seconds while the router tests the Internet connection. 13.
14. Connect your computer wirelessly to the TEW-655BR3G. 15. Open up your browser and enter in a URL (e.g. www.trendnet.com) to verify that you have Internet connection. Your Configuration is now complete For detailed information regarding the TEW-655BR3G’s configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com.
4. LEDs Power (Battery) Green (Blinking): Battery is in use Amber (Solid): Battery is running low and needs to be charged Not Illuminated: Power switch is set to off position or the battery is dead Power (Power Adapter) Green (Solid): Power is on. Amber (Solid; Power Switch set to on): Battery is charging or no battery is installed. Amber (Solid; Power Switch set to off): Battery is charging. Not Illuminated: Power adapter is not connected or battery is not installed.
Troubleshooting 1. I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW-655BR3G's web configuration page? 1. Check your hardware settings again by following the instructions in Section 2. 2. Make sure the Ethernet and Wireless LEDs are lit. 3. Make sure your TCP/IP settings are set to Obtain an IP address automatically (see the steps below). 4. Press on the factory reset button for 15 seconds. Windows 7 1.
2. I am not sure what type of Internet Account Type I have for my Internet connection. How do I find out? Contact your Internet Service Provider's (ISP) support service for the correct information. 3. I went through the Wizard, but I can not get onto the Internet. What should I do? 1. Verify that you can get onto the Internet by connecting your 3G USB adapter directly to your computer. 2.
Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues.
2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. 3. Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall.
GPL/LGPL General Information This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. The details of the GNU GPL and LGPL are included in the product CD-ROM. Please also go to (http://www.gnu.org/licenses/gpl.
GPL/LGPL informações Gerais Este produto TRENDnet inclui software gratuito desenvolvido por terceiros. Estes códigos estão sujeitos ao GPL (GNU General Public License) ou ao LGPL (GNU Lesser General Public License). Estes códigos são distribuídos SEM GARANTIA e estão sujeitos aos direitos autorais dos desenvolvedores. TRENDnet não presta suporte técnico a estes códigos. Os detalhes do GNU GPL e do LGPL estão no CD-ROM do produto. Favor acessar http://www.gnu.org/licenses/gpl.txt ou http://www.gnu.
Copyright © 2010. All Rights Reserved. TRENDnet.
