Quick Installation Guide

Note:

1. To protect your network from any unauthorized access it is recommended to enable

wireless encryption.

2. The example below is for WPA2-PSK security. If you select WPA-PSK or WPA2-PSK,

make sure your wireless adapters support WPA or WPA2. If your wireless adapters

do not support WPA or WPA2, then select WEP.

5. Enter the Old password (By default, the

Password is admin), enter a New Password,

reconfirm the New Password and then click

Next.

6. Select your Time Zone and then click Next.

7. Select Wireless WAN for WAN Interface.

Select 3G or iBurst (the example shown is for

3G). Then click Next. Configure the settings

based on information provided by your ISP.

Follow the wizard instructions to complete the

configuration.

Note: Each WAN type may have different

options.

8. Enter the desired Network ID (SSID) and then

click Next.