User's Guide

Secondary DNS: This feature allows you  to assign a Secondary DNS Server, you can

contacttoyourISPtogetit.(Optional)

ConnectionControl:Selectyourconnectioncontrol.Thereare3modestoselect:

Connect‐on‐demand:ThedevicewilllinkupwithISPwhentheclientssendoutgoing

packets.

AutoReconnect(Always‐on):ThedevicewilllinkwithISPuntiltheconnectionis

established.

Manually:Thedevicewillnotmakethelinkuntilsomeoneclickstheconnect‐button

intheStatus‐page.

Keep Alive: This feature must collocate with thefunction "Auto" of "Auto Connect".

Enableittokeeptheconnectionalwaysbeestablished.

LCPEchoRequest:Enterthetimeintervalandthemaximumfailurecount.Thedevice

willconstantlysendouttheLCPpacketsforkeepingtheconnectionalive.

PingRemoteHost:EntertheRemotehostIPandthetimeintervaltosendtheping

packetsforkeepingtheconnectionalive.



StaticIPAddress:



ActivateWW ANforAuto‐Failover:Withthisfunctionenabled,whentheEthernetWAN

connectionisbroken,thedevice willautomaticallyactivatethe WWANconnectionand

keep you connected to internet with the alternative WWAN broadband service.

Meanwhile,ifthedevicedetectedthattheEthernetWANconnectionisrecovered,your

broadbandconnectionwillbeswitchedtousetheEthernetWANservice.

WANIPAddress,SubnetMask,Router,PrimaryandSecondaryDNS:Entertheproper

settingsprovidedbyyourISP.