User's Guide

DynamicIPAddress:


ActivateWWANforAuto‐Failover:Withthisfunctionenabled,whentheEthernetWAN
connectionisbroken,thedevicewillautomaticallyactivatetheWWANconnectionand
keepyouconnectedtointernetwiththealternativeWWANbroadbandservice.
Meanwhile,ifthedevicedetectedthattheEthernetWANconnectionisrecovered,your
broadbandconnectionwillbeswitchedtousetheEthernetWANservice
HostName:Optional,requiredbysomeISPs,forexample,@Home.
ConnectionControl:Thereare3modestoselect:
Connect‐on‐demand:ThedevicewilllinkupwithISPwhentheclientssendoutgoing
packets.
AutoReconnect(Always‐on):ThedevicewilllinkwithISPuntiltheconnectionis
established.
Manually:Thedevicewillnotmakethelinkuntilsomeoneclickstheconnect‐button
intheStatus‐page.

PPPoverEthernet

18