User's Guide

broadbandconnectionwillbeswitchedtousetheEthernetWANser vice 

IPMode:PleasechecktheIPmodeyourISPassigned,andselect“StaticIPAddress”or

“DynamicIPAddress”.

MyIP Addressand MySubnetMask:TheprivateIPaddressand subnetmaskyourISP

assignedtoyou.

Router IP and Server IP Address/Name: The IP address of the PPTP server and

designatedRouterprovidedbyyourISP.

PPTPAccountandPassword:TheaccountandpasswordyourISPassignedtoyou.Ifyou

don'twanttochangethepassword,keepitblank.

ConnectionID:Optional.InputtheconnectionIDifyourISPrequiresit.

MaximumIdle Time: the time of no activity to disconnect yourPPTP session.Set it to

zero or enable “Auto‐reconnect” to disable this feature. If Auto‐reconnect is enabled,

thisdevicewillconnectwithISPautomaticallyaftersystemisrestartedorconnectionis

dropped.

ConnectionControl:Thereare3modestoselect:

Connect‐on‐demand:ThedevicewilllinkupwithISPwhentheclientssendoutgoing

packets.

Auto Reconnect (Always‐on): The device will link with ISP until the connection is

established.

Manually:The devicewillnotmakethelinkuntilsomeoneclickstheconnect‐button

intheStatus‐page.

Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The default

MTUvalueis0(auto).



L2TP



ActivateWWANforAuto‐Failover:Withthisfunctionenabled,whentheEthernetWAN

connectionisbroken,thedevicewillautomaticallyactivatetheWWANconnectionand

keepyouconnectedtointernetwiththealternativeWWANbroadbandservice.