User's Guide

Meanwhile,ifthedevicedetectedthattheEthernetWANconnectionisrecovered,your
broadbandconnectionwillbeswitchedtousetheEthernetWANservice
IPMode:PleasechecktheIPmodeyourISPassigned,andselect“StaticIPAddress”or
“DynamicIPAddress”.
MyIPAddressandMySubnetMask:TheprivateIPaddressandsubnetmaskyourISP
assignedtoyou.
Router IP and Server IP Address/Name: The IP address of the L2TP server and
designatedRouterprovidedbyyourISP.
L2TPAccountandPassword:TheaccountandpasswordyourISPassignedtoyou.Ifyou
don'twanttochangethepassword,keepitblank.
ConnectionID:Optional.InputtheconnectionIDifyourISPrequiresit.
MaximumIdle Time: The time ofnoactivityto disconnectyour L2TP session. Set it to
zero or enable “Auto‐reconnect” to disable this feature. If Auto‐reconnect is enabled,
thisdevicewillconnectwithISPautomatically,aftersystemisrestartedorconnectionis
dropped.
ConnectionControl:Thereare3modestoselect:
Connect‐on‐demand:ThedevicewilllinkupwithISPwhentheclientssendoutgoing
packets.
Auto Reconnect (Always‐on): The device will link with ISP until the connection is
established.
Manually:The devicewillnotmakethelinkuntilsomeoneclickstheconnect‐button
intheStatus‐page.
Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The default
MTUvalueis0(auto).

DHCPServer



DHCPServer:ChooseeitherDisableorEnable.IfyouenabletheDHCPServerfunction,
thefollowingsettingswillbeeffective.
 IPPoolStarting/EndingAddress:Wheneverthereisarequest,theDHCPserverwill
automaticallyallocateanunusedIPaddressfromtheIPaddresspooltothe
requestingcomputer.Youmustspecifythestarting/endingaddressoftheIP
addresspool.
 LeaseTime:DHCPleasetimetotheDHCPclient.
 DomainName:Optional,thisinformationwillbepassedtotheclients.
21