Quick Installation Guide

Note: In the example below, the ADSL connection type is PPPoE.

Note:

1. For Connection Trigger, select Continuous to keep the Internet connection always on.

2. Idle Disconnect allows you to configure an auto-disconnect time in seconds

(30-3600). The TEW-658BRM will automatically disconnect from the Internet if no

Internet activity has been detected within the period of Idle Disconnect entered.

6. Select the desired ADSL connection type and

then click Next.

5. Configure the settings based on information

provided by your ISP. Then Click Next.

7. Configure the settings based on information

provided by your ISP. Then click Next. In most

cases for PPPoE connection method, you need

to configure the following and typically the

remaining default settings should be fine.

User Name

User Password

Mac Address (Clone Mac)

If Static is selected for IPMode of Connection

you would need to configure the following:

IP address: The assigned IP address should

match your network. This IP address should

not be used by any other network device on

your network.

Subnet Mask: In most cases, the default

Subnet Mask (255.255.255.0) should be fine.