Quick Installation Guide

2
Please verify your DSL Internet broadband connection type with your ISP and ensure
you have all the information for one of the following connection types:
1. PPPoE (RFC-2516 PPP over Ethernet)
ŸVPI: _____ (0~255)
ŸVCI: _____ (32~65535)
ŸEncapsulation (LLC or VCMUX)
ŸATMQoS (UBR, CBR, VBR-nrt, VBR-rt)
ŸPeak Cell Rate: _____ (0~6000 cells/s)
ŸMaximum Burst Size: _____ (0-65535 Cells)(VBR-nrt/VBR-rt ATMQoS only)
ŸSustainable Cell Rate: _____ (0~65535 cells)(VBR-nrt/VBR-rt ATMQoS only)
ŸEnable Default VLAN (Enable/Disable)
ŸPPPoE PassThrough (Enable/Disable)
ŸState of Connection (Enable/Disable)
ŸIPMode of Connection (Dynamic/Static)
ŸIP Address: _____. _____._____._____ (Static IPMode only)
ŸSubnet Mask: _____. _____._____._____ (Static IPMode only)
ŸName: ________________
ŸNAT (Enable/Disable)
ŸUser Name: ___________________________
ŸUser Password: ________________
ŸConfirm Password: ________________
ŸMax MRU: _____ (576~1492)
ŸDNS Enabled (Enable/Disable)
ŸDNS Override Allowed (Enable/Disable)
ŸDNS Server 1: _____. _____._____._____ (optional)
ŸDNS Server 2: _____. _____._____._____ (optional)
ŸPPPoE Service Name: ________________ (optional)
ŸMac Address: ________________
ŸPPPoE AC Name:________________ (optional)
ŸConnection Trigger (OnDemand/ AlwayOn/ Manual)
ŸIdle Disconnect Time (30~3600 seconds)
ŸAs system default route (Current setting : pppoe ) (Setup " Internet Setup)
ŸICMP Reply Enable (Setup " Internet Setup)
ŸLCP Interval (0~86400 seconds)
ŸProxy ARP Enable
Collect Internet Service Provider (ISP) Information