Quick Installation Guide

2. PPPoA (RFC-2364 PPP over ATM)

ŸVPI: _____ (0~255)

ŸVCI: _____ (32~65535)

ŸEncapsulation (LLC or VCMUX)

ŸATMQoS (UBR, CBR, VBR-nrt, VBR-rt)

ŸPeak Cell Rate: _____ (0~6000 cells/s)

ŸMaximum Burst Size: _____ (0-65535 Cells)(VBR-nrt/VBR-rt ATMQoS only)

ŸSustainable Cell Rate: _____ (0~65535 cells)(VBR-nrt/VBR-rt ATMQoS only)

ŸEnable Default VLAN (Enable/Disable)

ŸPPPoE PassThrough (Enable/Disable)

ŸState of Connection (Enable/Disable)

ŸIPMode of Connection (Dynamic/Static)

ŸIP Address: _____. _____._____._____

ŸSubnet Mask: _____. _____._____._____

ŸName: ________________

ŸNAT (Enable/Disable)

ŸUser Name:________________

ŸUser Password: ________________

ŸConfirm Password: ________________

ŸMax MRU: _____ (576~1492)

ŸDNS Enabled (Enable/Disable)

ŸDNS Override Allowed (Enable/Disable)

ŸDNS Server 1: _____. _____._____._____ (optional)

ŸDNS Server 2: _____. _____._____._____ (optional)

ŸConnection Trigger (OnDemand/ AlwayOn/ Manual)

ŸIdle Disconnect Time (30~3600 seconds)

ŸLCP Interval: _____ (0~86400 seconds)

ŸAs system default route (Current setting : pppoe ) (Setup " Interent Setup)

ŸICMP Reply Enable (Setup " Interent Setup)

ŸProxy ARP Enable

3. IPoA (RFC-1483 Routed)