Quick Installation Guide

4
ŸState of Connection (Enable/Disable)
ŸName: ________________
ŸNAT (Enable/Disable)
ŸAddress Type (DHCP/Static)
ŸExternal IP Address: _____. _____._____._____
ŸSubnet Mask: _____. _____._____._____
ŸDefault Gateway:_____. _____._____._____
ŸDNS Enabled (Enable/Disable)
ŸDNS Override Allowed (Enable/Disable)
ŸDNS Server 1: _____. _____._____._____ (optional)
ŸDNS Server 2: _____. _____._____._____ (optional)
ŸAs system default route (Current setting : pppoe ) (Setup " Interent Setup)
ŸICMP Reply Enable (Setup -> Interent Setup)
ŸProxy ARP Enable
4. Dynamic IP Address (IPoEoA/MER (MAC Encapsulated Routed) with DHCP)
ŸVPI: _____ (0~255)
ŸVCI: _____ (32~65535)
ŸEncapsulation: _____ (LLC or VCMUX)
ŸATMQoS (UBR, CBR, VBR-nrt, VBR-rt)
ŸPeak Cell Rate: _____ (0~6000 cells/s)
ŸMaximum Burst Size: _____ (0-65535 Cells)(VBR-nrt/VBR-rt ATMQoS only)
ŸSustainable Cell Rate: _____ (0~65535 cells)(VBR-nrt/VBR-rt ATMQoS only)
ŸEnable Default VLAN (Enable/Disable)
ŸPPPoE PassThrough (Enable/Disable)
ŸState of Connection (Enable/Disable)
ŸName: ________________
ŸNAT (Enable/Disable)
ŸAddress Type (DHCP/Static)
ŸDNS Enabled (Enable/Disable)
ŸDNS Override Allowed (Enable/Disable)
ŸDNS Server 1: _____. _____._____._____ (optional)
ŸDNS Server 2: _____. _____._____._____ (optional)
ŸMac Address: ________________
ŸOption 125 (Enable/Disable)
ŸOption 60 Vendor ID: _____ (optional)
ŸOption 61 IAID: _____ (optional)
ŸOption 61 DUID : _____ (optional)
ŸAs system default route (Current setting : pppoe ) (Setup " Interent Setup)
ŸICMP Reply Enable (Setup -> Interent Setup)
ŸProxy ARP Enable