Quick Installation Guide

7
2. Hardware Installation
1. Connect one end of the Network cable to one of
the TEW-658BRM's LAN ports. Connect the
other end of cable to the computer's Ethernet
port.
2. Connect one end of the RJ-11 telephone cable
to the TEW-658BRM's ADSL port. Connect the
other end of the cable to the phone jack.
3. Connect the Power Adapter to the
TEW-658BRM and then to a power outlet. Push
the power button to the “On” position. Wait for
about 20 seconds.
4. Verify that the following panel lights are on:
Power (Green), LAN 1~4 (Green) (port your
computer is connected to), Wireless (Green)
and DSL (Green). Please see trouble shooting
section for additional information on LED
behaviors.