User's Guide

Windows Vista
If you are using Windows

Vista, follow the instructions below to configure your
computer.
1. Click
Start
>
Control Panel
>
Network and
Internet Connections > Network
Connections.
2. Right-click Local Area Connection, then
click Properties.
3. On the General tab, make sure that
Internet Protocol (TCP/IP) is checked. If
not, check it to enable the Properties
button.
4. Select Internet Protocol (TCP/IP), and then
click Properties.
5. Select Obtain an IP Address automatically
and Obtain DNS server address
automatically.
6. Click OK.
General Page
Windows 7
If you are using Windows

7, follow the instructions below to configure your
computer.
1. Click Start > Control Panel > Network &
Sharing Center.
2. Click Local Area Connection.
3. Click Properties.
4. On the network components list, make sure
that Internet Protocol (TCP/IP) is checked.
If not, check it to enable the Properties
button.
5. Select Internet Protocol (TCP/IP), and then
click Properties.
6. On the General tab, select Obtain an IP
Address automatically and Obtain DNS
server address automatically.
7. Click OK.
General Page