User's Guide

•
Shared Key — Requires users to enter the same WEP key to exchange data
with other wireless devices.
Encryption Strength — Select 64bit to enter or generate a 10-character key or
select 128bit to enter or generate a 26-character key.
Key Format — Select HEX to generate hexadecimal characters only or ASCII to
generate ASCII characters.
Passphrase — Enter a passphrase, then click the Generate button to automatically
generate WEP keys.
Key 1, 2, 3, 4 — When you enter a passphrase and click the Generate button, these
fields display the auto-generated keys. Otherwise, enter the WEP key(s) manually.
Click the Apply button to save your changes or click the Cancel button to discard
your changes.
WPA (TKIP)
Select WPA (Wi-Fi Protected Access) using TKIP (Temporal Key Integrity Protocol) for
better encryption.
Authentication Type — Select an authentication type. Options are:
• PSK: Select to use a passphrase for authentication.
If you select PSK, enter a passphrase in the Confirmed Passphrase field.
• EAP — Select to use Extensible Authentication Protocol (EAP). This should
only be used when a Radius server is connected to your Modem Router.
If you select EAP, enter the following information:
• Radius Server IP: The IP address of the authentication server.
• Radius Server Port: The port number used to connect to the
authentication server.
• Radius Server Key: Enter the passphrase that matches the
authentication server.
Encryption Type — Displays the encryption type you selected.