User's Guide

Group Rekey Time — Enter the number of seconds to elapse until the Modem
Router prompts for the key again.
Click the Apply button to save your changes or click the Cancel button to discard
your changes.
WPA2 (AES)
Select WPA (Wi-Fi Protected Access) using AES (Advanced Encryption Standard) for
better encryption.
Authentication Type — Select an authentication type. Options are:
• PSK: Select to use a passphrase for authentication.
If you select PSK, enter a passphrase in the Confirmed Passphrase field.
• EAP — Select to use Extensible Authentication Protocol (EAP). This should
only be used when a Radius server is connected to your Modem Router.
If you select EAP, enter the following information:
• Radius Server IP: The IP address of the authentication server.
• Radius Server Port: The port number used to connect to the
authentication server.
• Radius Server Key: Enter the passphrase that matches the
authentication server.
Encryption Type — Displays the encryption type you selected.
Group Rekey Time — Enter the number of seconds to elapse until the Modem
Router prompts for the key again.
Click the Apply button to save your changes or click the Cancel button to discard
your changes.
WPA (TKIP) / WPA2 (AES)
Select this security mode if you are unsure which mode is suitable for your wireless
devices.