User's Guide

Authentication Type — Select an authentication type. Options are:
• PSK: Select to use a passphrase for authentication.
If you select PSK, enter a passphrase in the Confirmed Passphrase field.
• EAP: Select to use Extensible Authentication Protocol (EAP). This should
only be used when a Radius server is connected to your Modem Router.
If you select EAP, enter the following information:
• Radius Server IP: The IP address of the authentication server.
• Radius Server Port: The port number used to connect to the
authentication server.
• Radius Server Key: Enter the passphrase that matches the
authentication server.
Encryption Type — Displays the encryption type you selected.
Group Rekey Time — Enter the number of seconds to elapse until the Modem
Router requires the wireless devices to re-authenticate.
Click the Apply button to save your changes or click the Cancel button to discard
your changes.
Local Network
To access the Local Network page, click SETUP > Local Network.
LAN
This section contains the local settings of your network. These settings are private
to your internal network and cannot be seen on the Internet. It is recommended to
keep the default values.
IP Address — The default value is 192.168.10.1.
Subnet Mask — The default value is 255.255.255.0.
Local Domain Name — Enter a name to refer to the group of devices that will be
assigned addresses from this pool.