User's Guide

Time and Date
The Time and Date page allows you to manually configure the time and date of your
network or to synchronize with a Network Time Protocol (NTP) server.
To access the Time and Date page, click SETUP > Time and Date.
Time Zone — Select the time zone in your location. To set the network time and
date according to the selected time zone, click the Sync Time button.
NTP (Network Time Protocol) — Check the Enable box to synchronize the network
time and date with an NTP server.
• Server 1 IP or Domain name: Enter the IP address or the domain name of
the NTP server to synchronize your network with.
• Server 2 IP or Domain name: Enter the IP address or the domain name of
another NTP server to synchronize your network with in case Server 1 is
not available.
• First Poll Frequency: Enter the number in seconds of the first poll.
• ThereAfter Frequency: Select the succeeding frequency from the drop-
down list.
Daylight Saving — Check the Enable box to enable daylight saving time.
• Start Time: Select the month and the day to start the daylight saving time.
• End Time: Select the month and the day to end the daylight saving time.
Click the Apply button to save your changes or click the Cancel button to discard
your changes.