User's Guide

Name (SSID) — Select the SSID from the drop-down list.
To Set MAC Filter
Do the following to deny or allow a device to access to the wireless network.
9. Select the MAC Restrict Mode. Options are:
• Disable: No restriction.
• Deny: To deny access to the wireless network.
• Allow: To allow access to the wireless network.
10. On the MAC Address field, enter the MAC address of the device that you
want to deny or allow access.
11. Click the Add button to add the MAC address to the MAC ADDRESS LIST.
12. Click the Apply button to apply the MAC filter or click the Cancel button to
discard your changes.
To Remove MAC Filter
13. On the MAC ADDRESS LIST, click the icon to remove the restriction on the
corresponding MAC filter.
14. When prompted, click OK to confirm.
WPS Setting
Wi-Fi Protected Setup (WPS) is designed to make wireless setup easy and yet secure.
Users do not need to know the network SSID and passphrases to use WPS to join
the wireless network.
This page allows you to enable WPS-supported devices to connect to your Modem
Router.

NOTE: This feature is available only in WPA-PSK, WPA2PSK, or OPEN mode.