User's Guide

Multi-WAN
DSL Auto Scan
This page allows you to scan your DSL line for available VPI/VCI.
To access the DSL Auto Scan page, click Advanced > Multi-WAN > DSL Auto Scan or
click the DSL Auto Scan button.
VPI/VCI Scanning
Click the Scan button to start scanning your DSL line for available VPI/VCI. Scanning
may take several minutes. Click the Cancel button to stop scanning.
Current Auto-PVC Table
Displays the current PVCs. Your Modem Router supports up to 8 PVCs.
To modify an entry, do the following:
15. Click the
icon. The selected entry is displayed on the editable field.
16. Enter the new VPI/VCI values.
17. Click the Save button.