User's Guide

IP/PPP Config
This page allows you to create multiple Wide Are Networks (WAN) and manually
add an IP or a PPP connection.
To access the IP/PPP Config page, click Advanced > Multi-WAN > IP/PPP Config or
click the WAN Config button.
To add an IP or PPP connection, do the following:
18. Click the Add button of the connection that you want to add.
19. On the Interface field, select the PVC.
20. Enter the connection settings. The screen and the required settings vary
depending on the type of connection that you want to add. See “Protocol” on
page 21 for more information.
21. Click the Apply button to save your changes or click the Cancel button to
discard your changes.
To edit an IP or PPP connection, click the corresponding
icon.
To delete an IP or PPP connection, click the corresponding icon.
Default Route
This page allows you to change the default route of your Modem Router.
To access the Default Route page, click Advanced > Multi-WAN > Default Route or
click the Default Route button.
Change Default Route — Select the connection to set as the default route from the
drop-down list.
Click the Apply button to save your changes or click the Cancel button to discard
your changes.